Solar Saver
®
Series Single Wall
Energy Saver Water Heater
The Solar Saver
®
Series Single Wall Models feature:
■ H
eat Exchanger—
S
ingle Wall 1
1
⁄2"
O.D. glass coated (Vitraglas
®
)
steel coil.
T
he coil has a heat transfer area of 14.2 sq. ft. and a stored water volume of
2
.5 gal. Maximum supply temperature from the solar collector must not
exceed 250°F.
■ Sensor Wires for Solar Thermistor Connections—Twisted wires are
provided under the Upper and Lower covers. These wires have been
provided as a means for connecting thermistors to a solar controller
(Thermistors and Solar Controller are not provided).
■ Optimizer
™
Temperature Control System—Integrated mixing device
features a thermostatically controlled mixing device that is pre-piped with a
flexible connector. This required system is easily installed and ensures a
comfortable outlet temperature while providing a steady flow of hot water.
■ Double Element Backup—Allows entire storage tank to hold hot water
during periods where solar heating is not available.
■ Factory Installed Hydrojet
®
Total Performance System—Cold water inlet
sediment reducing device helps prevent sediment build up in tank.
Increases first hour delivery of hot water while minimizing temperature build
up in tank.
■ Vitraglas
®
Lining—Bradford White water heater tanks are protected from
the corrosive effects of hot water by an exclusive ceramic porcelain-like
coating. The Bradford White high silica Vitraglas
®
lining provides a tough
interior surface for our hot water tanks.
■ Fully Automatic Controls—Fast acting surface-mount thermostats for
automatic temperature control. Factory installed sensitive manual reset
energy cutoff for safety to prevent overheating.
■ Supply and Return Connections—1" NPT female connections are located
on the front for both the solar collector supply and return.
■ 2" Non-CFC Foam Insulation—Covers the sides and top of tank, reducing
the amount of heat loss. This results in less energy consumption, improved
operation efficiencies and jacket rigidity.
■ Potable Water Connections—3⁄4" NPT factory installed true dielectric
fittings extend water heater life and eases installation.
■ T
wo Protective Aluminum Anode Rods—
Pr
ovide added protection
against corrosion for long trouble-free service.
■ Direct Heat Transfer With Immersed Incoloy Elements—Transfers heat
directly and efficiently to the water. Screw-in style.
■ Steel Tank—Heavy gauge steel automatically formed, rolled and welded to
assur
e a continuous seam for glass lining.
■ T&P Relief Valve—Included.
■ Brass Drain V
alve
.
6-Y
ear Limited Tank Warranties / 6-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the war
ranty included with the heater
.
Photo is of
S-SW2-60R6DS
MANUF
ACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS:
7,063,133 B2; 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879;
5,277,171; (B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919;
Re. 34,534. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105.
Solar Saver
®
, V
itraglas
®
and Hydr
ojet
®
ar
e r
egister
ed trademarks of Bradfor
d White
®
Corporation.
501-B-0408-A