Filter
Top Products
Features:
Bradford White is ISO registered to the
9001 standard.
■ All residential storage models meet or exceed efficiency requirements
of the Department of Energy. ASHRAE Standard 90.1 b (current
standard) and the National Appliance Energy Conservation Act of 1987
recent amendment effective January 20, 2004 which supercedes all
state and local efficiency requirements.
■ 1" Non-CFC foam insulation—surrounds the tank surface, saving
energy by retarding loss of heat.
■ Closed combustion—all air for combustion is taken directly from the
outside. The co-axial vent pipe (pipe inside a pipe) draws combustion
air in through the outer pipe (6"), and exhausts the products of
combustion through the inner pipe (4").
■ Co-axial—rotational venting at top of unit.
■ Heat Traps—factory installed, minimizes heat loss through piping.
■ Water Connections—3/4" NPT factory installed true dielectric fittings.
Extends water heater life and eases installation.
■ No electrical power necessary.
■ Piezo igniter—for ease of lighting the pilot.
■ Vitraglas
®
lined tank—Bradford White water heater tanks are
protected from the corrosive effects of hot water by an exclusive
ceramic porcelain-like coating. The Bradford White high silica Vitraglas
®
lining provides a tough interior surface for our water heater tanks.
■ Factory installed Hydrojet
®
Total Performance System—cold inlet
sediment reducing device. Helps prevent sediment build up in tank.
Increases first hour delivery of hot water while minimizing temperature
build up at top of tank.
■ Protective magnesium anode rod—provides added protection
against corrosion for long trouble-free service.
■ Brass drain valve.
■ T&P relief valve—included.
■ Side Tappings—for space heating purposes.
■ Fully automatic controls—automatic temperature selection at your
fingertips. Built-in energy cut-off switch prevents abnormally high water
temperature for extra safety. Built-in gas pressure regulation. Fast-
acting thermostat starts heat recovery cycle sooner.
■ Optional vent kits—allow for up to 8 foot max vertical and 8 foot
max horizontal (2.4 meters). All DH-1 models must be terminated
horizontally
■ Six or ten year limited warranty on steel tank—heavy gauge steel
automatically formed, rolled and welded to assure a continuous seam
for glass lining.
■ Six year limited warranty on parts.
■ Design certified by CSA International. (formerly AGA and CGA)
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 7,063,133 B2; 5,954,492;
5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879;
5,277,171; (B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448;
4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re.
34,534. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS:
1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105.5.
Residential Energy Saver
High Input Direct Vent Water Heater
STANDARD
9001
1
EFFICIENCY
R
ATING
CERTIFIED