Bissell 94Y2 Carpet Cleaner User Manual


 
www.bissell.com 800.237.7691
11
Operations
Portable spot cleaning mode
Preparing the machine
1. Step on the portable spot cleaning pedal to
release the portable spot cleaner.
2. Release flex hose by twisting the hose
secure latch clockwise. Unwrap flex
hose completely.
3. Attach the desired tool to the hose grip
until it snaps together. Make certain the
tool is securely attached.
4. Twist the Quick Release cord wrap clock-
wise to unwrap the power cord com-
pletely and plug into grounded outlet.
Filling tank
1. Follow the instructions for filling the tank
in the upright cleaning mode section on
page 8
Cleaning with Tools:
IMPORTANT! If using to clean uphol-
stery, check upholstery tags. Check
manufacturer’s tag before cleaning.
“W” or “WS” on the tag means you
can use your Lift off Deep Cleaner if
the tag is coded with an “X” or an
“S”(with a diagonal stripe through it),
or says “Dry Clean Only”, do not pro-
ceed with any deep cleaning machine.
Do not use on velvet or silk. If manu-
facturer’s tag is missing or not coded,
check with your furniture dealer.”)
1. Hold the tool approximately 1" above
the soiled surface. Press the spray trig-
ger to apply the cleaning solution to the
soiled area.
Note: Hold end of hose below the
tank water level to help prime the
portable spot cleaner.
2. Using the brush on the tool, gently scrub the
area to be cleaned.
3. Apply downward pressure on the tool and
pull it toward you. The suction will remove
the dirt and cleaning solution. Continue until
no more dirt can be removed.
Adsdfdd ghg bvh
cvbbj jkn hnbj jkvh
gcghhjj jhffhl kllgh
Manufacturer’s tag
IMPORTANT
Check for colorfastness in an
inconspicuous place. If pos-
sible, check upholstery stuffing.
Colored stuffing may bleed
through fabric