Bissell 8920 Vacuum Cleaner User Manual


 
Operation
Carpet cleaning (Continued)
8. Water rinse (Optional). Rinsing is an optional
step that can be done during the cleaning
process by switching from one of the clean
settings on the Custom Clean dial to a water
rinse setting, or it can be done after the
carpeted area has been cleaned. Simply
choose the water rinse setting on the custom
clean dial, and follow the same path as you
did for cleaning, taking care to do a forward
(wet) stroke by depressing the trigger, a
backward (wet) stroke, and a forward and
backward (dry) stroke, releasing the trigger.
Continue this until the water you see coming
up the nozzle is clear.
Cleaning with attachments
Your ProHeat 2X machine comes equipped with
a hose and at least one attachment for cleaning
stairs, upholstery, and more.
1. Important! If using to clean upholstery, check
upholstery tags.
A. Check manufacturer’s tag before cleaning.
“W” or “WS” on the tag means you can
use your ProHeat 2X. If the tag is coded
with an “X” or an “S” (with a diagonal
stripe through it), or says “Dry Clean Only”,
do not proceed with any deep cleaning
machine. Do not use on velvet or silk. If
manufacturer’s tag is missing or not coded,
check with your furniture dealer.
B. Check for colorfastness in an
inconspicuous place.
C. If possible, check upholstery stuffing.
Colored stuffing may bleed through
fabric when wet.
D. Plan activities to allow upholstery time to
dry.
E. Vacuum thoroughly to pick up loose debris
and pet hair. Use a vacuum with a brush
attachment and a crevice tool to clean in
fabric folds.
2. Follow the instructions on pages 9 & 10 for filling
the 2-in-1 water tank and the formula tank.
3. Set ReadyTools dial to the hose attachments
setting. This will allow spray and suction from
the hose.
Manufacturer’s tag
12
www.bissell.com 800.237.7691
8.
OR
WARNING:
To reduce the risk of
injury, be extra careful
when cleaning stairs.
Make sure machine is
secure and level.
ug310-5943_9200_608.indd 12 6/26/08 2:11:49 PM