Bissell 1693 Vacuum Cleaner User Manual


 
6
The Power Switch controls power to the machine.
The powered brush roll at the Floor Nozzle is designed
to enhance cleaning performance. The bristle pattern
lifts out the deep down dirt while gently grooming
carpet fibers. The floating suspension self-adjusts to
all carpet heights and protects your carpet if you leave
the Power Switch ON. When the machine handle is in
the fully upright position, CarpetSaver
automatically
raises the brush off the carpet.
Your PowerSteamer is equipped with a Measuring Cup
for adding the proper amount of cleaning formula to
the Tank-in-Tank
. Before using the machine, simply
fill the Measuring Cup to the fill line with BISSELL
Advanced Deep Cleaning Formula. Pour the formula
into the Tank-in-Tank as shown on page 7. For
convenience, the Measuring Cup stores on the back
of the unit.
This easy-to-use system is designed with a bladder
inside to hold clean water. As you clean, the bladder
will empty. Dirty water collects in the tank outside
the bladder.
NOTE: Make sure to add formula to the tank before
filling it with water.
Depress the Handle Release pedal to tilt back
the handle.
Lift the Tank-in-Tank handle. The handle locks the lid in
place. Carry the Tank-in-Tank like a bucket to fill at the sink.
Set the Tank down and rotate the handle forward to
unlatch the Lid. Lift off and set the Lid aside.
Tip:
Deep cleaning carpeting
and upholstery regularly
can reduce dust and
allergens in your home.
Measuring Cup
WARNING:
To reduce the risk of
fire, electric shock
or injury unplug
from outlet before
servicing.
The Basics: How Your PowerSteamer Works
Power
DirtLifter® PowerBrush (on select models)
OFF
ON
ON
OFF
Power
Switch
To Fill The Tank-in-Tank™
1.
2.
3.
Tilt Handle
Back
Handle
Release
Lift and
Carry
Rotate Handle
to Unlatch
1
2
3
ug310-5907_1692-1694_205.indd 6ug310-5907_1692-1694_205.indd 6 4/18/05 9:19:55 AM4/18/05 9:19:55 AM