Bissell 1693 Vacuum Cleaner User Manual


 
12
With the unit still on its side, loop one end of the
replacement Pump Belt around the Red Pump Pulley
and then the other end around the silver motor shaft. Do not
twist the replacement pump belt.
Re-install the "toothed" Brush Belt first onto the Red Pump
Pulley and then onto the toothed end of the Brush.
Re-install the brush into the base of the unit.
Place the black brush arm onto the Brush and slide black
brush arm into original position.
Re-install the Red Retainer Plate and Phillips head screw.
Using your finger, gently spin the replacement pump belt on
the silver motor shaft. If assembled correctly, the replacement
Pump Belt should rotate freely around the silver motor shaft
and drive pulley without obstruction. The brush should also
rotate freely when the silver motor shaft is turned.
Turn the machine right side up and replace the Tank-in-Tank
and belt access door.
Assembly is now complete.
If you have any questions, or are having trouble installing
your replacement pump belt, please call BISSELL Consumer
Services at 1-800-237-7691.
1.
2.
3.
5.
6.
4.
7.
8.
To Install The Replacement Pump Belt
1.
2.
3.
4.
5.
6.
7.
ug310-5907_1692-1694_205.indd 12ug310-5907_1692-1694_205.indd 12 4/18/05 9:20:05 AM4/18/05 9:20:05 AM