Filter
Top Products
HUMIDIFIER SAFETY
PLEASE READ AND SAVE
THESE IMPORTANT
SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock, and injury to persons, including the following:
1. Read all instructions before using the appliance.
2. To avoid fire or shock hazard, plug the appliance
directly into a 120V AC electrical outlet.
3. Keep the cord out of heavy traffic areas. To avoid fire
hazard, NEVER put the cord under rugs, near heat
registers, radiator, stoves, or heaters.
4. DO NOT place humidifier near heat sources such as
stoves, radiators, and heaters. Do locate your
humidifier on an inside wall near an electrical outlet. The
humidifier should be at least 4 inches (10 cm) away
from the wall for best results.
5. NEVER place humidifier in an area where it is accessible
to children. NEVER use humidifier in a closed room,
particularly where a child may be sleeping, resting, or
playing (a closed room may result in excessive humidity).
6. WARNING: Do not attempt to refill humidifier without
first unplugging the unit from its electrical outlet. Failure
to heed this warning may cause personal injury.
7. NEVER place anything over moisture outlet when unit is
running.
8. NEVER drop or insert any object into any openings.
9. DO NOT operate any appliance with a damaged cord
or plug, if the appliance malfunctions, or if it has been
dropped or damaged in any manner. Return
appliance to manufacturer for examination, electrical
or mechanical adjustment, or repair.
10.Use appliance only for intended household use as
described in this manual. Any other use not
recommended by the manufacturer may cause fire,
electric shock, or injury to persons. The use of
attachments not recommended or sold by Bionaire
®
may cause hazards.
11.DO NOT use outdoors.
12.Always place humidifier on a firm, flat, level surface.
(4 inches from wall).A waterproof mat or pad is
recommended for under the humidifier. NEVER place it
on a rug or carpet, or on a finished floor that may be
damaged by exposure to water or moisture.
13.DO NOT allow the moisture outlet to directly face the wall.
Moisture could cause damage, particularly to wallpaper.
14.Humidifier should be unplugged when not in use.
15.NEVER tilt, move, or attempt to empty unit while it is
operating. Shut off and unplug before removing the
water reservoir and moving the unit.
16.This humidifier requires daily and weekly maintenance
to operate appropriately. Refer to daily and weekly
cleaning procedures. Use only cleaners and additives
recommended by the manufacturer.
17.NEVER use detergents, gasoline, glass cleaner,
furniture polish, paint thinner, or other household
solvents to clean any part of the humidifier.
18.Excessive humidity in a room can cause water
condensation on windows and some furniture. If this
happens, turn the humidifier OFF.
19.Do not use humidifier in an area where humidity level is
in excess of 50%. Use a hygrometer, available at your
local hardware store or through Bionaire, to measure
the humidity.
20.DO NOT attempt to repair or adjust any electrical or
mechanical functions on this unit. Doing so will void
your warranty. The inside of the unit contains no user
serviceable parts. All servicing should be performed by
qualified personnel only.
21.Never place humidifier housing under water flow or
immerse in liquids.
22.Do not plug in the cord with wet hands: electric shock
could result.
23.Do not pour water in any openings other than the water
tank.
24.To prevent damage to surfaces, do not place humidifier
under overhanging surfaces.
25.NEVER operate unit without water in the tank.
26.Use both hands when carrying full tank of water.
27.Do not move unit after it has been used until unit cools
completely.
PLEASE SAVE THESE
INSTRUCTIONS
CONSUMER SAFETY INFORMATION
This appliance has a POLARIZED AC
PLUG (one blade is wider than the other).
To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet
only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician
to install the proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR
DEFEAT THIS SAFETY FEATURE IN ANY WAY.
The length of cord used on this appliance was selected to
reduce the hazards of becoming tangled in, or tripping
over a longer cord. If a longer cord is necessary an
approved extension cord may be used. The electrical
rating of the extension cord must be equal to or greater
than the rating of the humidifier. Care must be taken to
arrange the extension cord so that it will not drape over the
countertop or tabletop where it can be pulled on by
children or accidentally tripped over.
PLEASE READ AND SAVE
THESE IMPORTANT
SAFEGUARDS
Consumer Safety Information:
NOTE: This is an electrical appliance and requires
attention when in use.
NOTE: If moisture forms on the walls or windows of the
room, turn off the humidifier. The room already has plenty
of humidity and additional moisture may cause damage.
NOTE: DO NOT block air inlet or outlet.
HOW COOL MIST WORKS:
Your Bionaire
®
Cool Mist humidifier draws dry air through
the rear air intake grill area. This air is then passed through
2 moisture-laden wick filters, which retains the minerals
and deposits in the water. The resulting moist air is
directed back into the room from the top air grill.
NOTE: This humidification system provides a cool, invisible
moisture output. It is normal not to see the mist.
NOTE: A humidity level below 20% can be unhealthy and
uncomfortable. The recommended humidity level is
between 40%-50%.
PRE-OPERATING INSTRUCTIONS:
1. Be sure the humidifier is switched to OFF and the unit
is disconnected from the electrical outlet.
2. Select a location for your humidifier, on a flat surface,
about 4 inch (10 cm) away from the wall. DO NOT
place the humidifier on a finished floor or near furniture,
which can be damaged by moisture or water. Place on
a moisture-resistant surface.
FILLING THE WATER TANK:
1. Remove the tank from the base of the humidifier and
bring to the faucet. Turn the tank upside down and
twist off the tank cap by turning counter clockwise. Fill
tank with cool, fresh tap water. DO NOT fill with warm
water as this may cause leaking. Replace the cap on
tank FIRMLY.
2. When full, carry tank to the humidifier and place onto
the base. The tank holds 3/4 gallons of water and the
base holds 1/4 gallon of water. The tank will
immediately begin to empty into base.
3. Plug the power cord into a 120V AC electrical outlet.
OPERATING INSTRUCTIONS:
Your humidifier is equipped with a technologically
advanced SmartTouch™ Electronic Humidistat. You can
set the humidifier to run continuously in manual mode or
set the SmartTouch™ Electronic Humidistat to your desired
humidity setting. The SmartTouch™ Electronic Humidistat
will automatically turn the humidifier ON or OFF, depending
on the preset comfort level. The comfort level ranges
between 35% and 55% relative humidity.
Manual Mode Instructions:
1. Plug the humidifier into a 120V AC electrical outlet.
2. To start the unit, push the MODE/OFF button once for
the HIGH manual setting. (See figure 2.)
3. Press the button again for the LOW manual setting.
(See figure 2.)
4. To stop the unit, press and hold the button for two
seconds, or keep pressing the button until all the
humidity indicators are OFF.
NOTE: In Manual Mode, only the LOW or HIGH power
light will be lit.
SmartTouch™ Humidistat Instructions:
To take advantage of the SmartTouch™ Electronic
Humidistat, press the MODE/OFF button until the speed is
set in either the HIGH or LOW setting, and the desired
Humidity is set. When the humidity level rises above the
set humidity, the humidifier will stop. When the humidity
level drops below the set humidity, the humidifier will turn
on automatically.
NOTE: When the SmartTouch™ Electronic Humidistat is
set, either the HIGH or LOW power light and the percent
humidity light will remain lit during operation. (See figure 2.)
NOTE: Allow up to 30 minutes for the filter to fully absorb
water and for the unit to produce moisture.
NOTE: The SmartTouch™ Humidifier has memory. This
means that when you turn the unit back on, it will be at the
last setting the humidifier was set at.
If you do not plan to use the humidifier for two or more
days, make sure any residual water is drained from the
water tank, base and wick filter to prevent algae or
bacteria growth.
SmartTouch™ REMOTE INSTRUCTIONS
(For BCM7203RC-CN only)
1. Insert 2 AAA batteries into back of remote control.
2. Press the SmartTouch™ button on remote to begin
operation.
3. Use the remote to control the same features as the
base unit.
NOTE: Do not mix new and old batteries. Do not mix
alkaline,standard (carbon-zine), or rechargeable
(nickel-cadmium) batteries.
REPLACING THE FILTERS:
Through normal use, waterborne minerals and sediment
become trapped in the wick filters. The harder your water,
the greater the amount of minerals in the water, and the
more often you will need to change your filters.
You will be able to monitor the life of the filters in your
humidifier by checking the FilterCheck
TM
Indicator. The
FilterCheck
TM
Indicator will only read the filter condition
when the humidifier is in operation.
NOTE: It may take up to 60 minutes of
operation for the FilterCheck
TM
Indicator
to reflect the filter condition. New filters
will register in the section reading Good
filter. After frequent use of your humidifier,
the FilterCheck
TM
Indicator will let you
know when the filters need to be
changed, see Figure 3.
When the needle is in the (CHANGE) section, this means
the proper amount of moisture is not getting into your air
due to the excessive minerals and sediment that have
become trapped on your filters. At this point, you should
replace your filters. It is important to change your filters as
indicated to obtain stated performance level.
To replace the filter, follow the steps below.:
1. Push the SmartTouch™ button (MODE/OFF) for 2
seconds to turn the unit OFF and disconnect from the
electrical outlet.
2. Remove the tank and main housing to access the
base.
3. Remove the wick holder from the base of the humidifier.
4. Remove each individual wick and discard. Do not
remove rivet, replacement wicks come equipped with
rivets for easy replacement.
5. Follow the weekly cleaning instructions.
6. Insert new filters into each section of the wick holder
making sure the rivet attaches to the wick holder
securely.
7. Do not use wicks without rivets as they will not produce
the unit's intended output.
8. Replace the wick holder into the base (it can only go in
by following the arrow indicator) and replace main
housing and then tank.
9. Repeat Operating Instructions steps.
It will take about 30 minutes for the humidifier to reach
maximum output.
You can purchase replacement filters (Model BWF100) by
calling 1-800-253-2764 or by visiting www.bionaire.com.
It is recommended that a replacement filter is purchased
for uninterrupted use.
CLEANING/MAINTENANCE INSTRUCTIONS:
Humidifiers provide comfort by adding moisture to dry,
heated indoor air. To benefit most from the humidifier and
avoid product misuse, follow all instructions carefully.
Please note that this is an electrical appliance and requires
attention when in use.
In addition, if you do not follow the recommended care and
maintenance guidelines, micro-organisms may be able to
grow in the water within the water tank. You must routinely
follow the cleaning procedures that follow in order to
ensure proper, efficient operation of your humidifier. Proper
maintenance and cleaning is essential to the continued
performance of your unit and the avoidance of algae or
bacteria build-up.
STORAGE INSTRUCTIONS
When not using your humidifier for an extended period of
time:
1. Dispose of the filters. DO NOT leave in unit.
2. Clean, rinse and thoroughly dry the humidifier as
directed in weekly maintenance. DO NOT leave any
water in the unit when storing. Leaving water in the unit
may render the unit inoperable for the following season.
3. Place the humidifier in the original carton and store in a
cool, dry place.
4. Order your replacement filters for next year’s use.
REPLACEMENT ACCESSORIES:
To order the replacement accessories you can do any of
the following:
• Visit your local retailer.
• Call consumer service at 1-800-253-2764.
If you have any questions regarding your product or
would like to learn more about other Bionaire
®
products,
please contact our Consumer Service Department at
1-800-253-2764 or visit our website at www.bionaire.com.
127459/9100030005141
SmartTouch™
Cool Moisture
Humidifier
MODEL BCM7203
BCM7203RC
Read instructions before operating.
Retain for future reference.
Instruction Leaflet
INFO-LINE
If after having read this leaflet, you have any
questions or comments on your humidifier,
call 1-800-253-2764 in North America.
☎
DAILY MAINTENANCE:
1. Before cleaning, push the SmartTouch™ button for 2
seconds to turn the unit OFF and disconnect from the
electrical outlet.
2. Remove the housing and the tank from the humidifier
and place in sink or tub.
3. Carry the base of the unit to the sink, remove the wick
holder and wicks, place in sink, drain any remaining
water and rinse thoroughly to remove any sediment or
dirt. Wipe clean, and dry with a clean cloth or paper
towel. NOTE: the base and wick holder are dishwasher
safe TOP RACK ONLY.
4. Drain the water from the tank into the sink and rinse
tank thoroughly. Wipe clean, and dry with a clean cloth
or paper towel
5. Put filters back in wick holder, replace on base, replace
the housing, then refill tank with cool tap water as
instructed earlier in the Filling Instructions. Do not
overfill.
6. Follow Operating Instructions.
WEEKLY MAINTENANCE:
To Remove Scale:
1. Repeat steps 1-4 above.
2. Clean the base by partially filling the base with one 8-oz
cups of undiluted white vinegar, or by using
Cleanse Clean
TM
solution (Model S1710) by the
manufacturer. Leave this solution in the base for 20
minutes, while cleaning the all interior surfaces with a
soft brush. Remove base scale by wiping the base with
a cloth dampened with undiluted white vinegar.
3. Rinse with clean warm water to remove the cleaning
solution before disinfecting the tank.
To Disinfect Humidifier Base and Tank:
1. Fill humidifier base with 1/4 gallon of water and 1/2
teaspoon of chlorine bleach.
2. Fill the tank 1/2 full with water and 1/2 teaspoon of
chlorine bleach.
3. Let the solution stand for 20 minutes, swishing every
few minutes. Wet all surfaces.
4. Carefully empty the base and tank after 20 minutes,
and rinse with water until you cannot detect any bleach
smell. Dry with a clean cloth or paper towel.
5. Check the FilterCheck
TM
Indicator to see if it is time to
replace the filters. Depending on water hardness in your
area, it may be necessary to change the filters every
1-2 months. Re-insert the wick filters into the wick
holder.
6. Refill the water tank as directed with cool tap water,
replace the humidifier housing, and turn the unit on.
A
Figure 2
A. Set Humidity Lights
B. Speed Setting Lights
C. Mode/Off Button
B
C
B
6 YEAR LIMITED WARRANTY
Sunbeam Products, Inc. doing business as Jarden
Consumer Solutions or if in Canada, Sunbeam Corporation
(Canada) Limited doing business as Jarden Consumer
Solutions (collectively “JCS”) warrants that for a period of six
years from the date of purchase, this product will be free
from defects in material and workmanship. JCS, at its option,
will repair or replace this product or any component of the
product found to be defective during the warranty period.
Replacement will be made with a new or remanufactured
product or component. If the product is no longer available,
replacement may be made with a similar product of equal or
greater value. This is your exclusive warranty. Do NOT
attempt to repair or adjust any electrical or mechanical
functions on this product. Doing so will void this warranty.
This warranty is valid for the original retail purchaser from the
date of initial retail purchase and is not transferable. Keep
the original sales receipt. Proof of purchase is required to
obtain warranty performance. JCS dealers, service centers,
or retail stores selling JCS products do not have the right to
alter, modify or any way change the terms and conditions of
this warranty.
This warranty does not cover normal wear of parts or
damage resulting from any of the following: negligent use or
misuse of the product, use on improper voltage or current,
use contrary to the operating instructions, disassembly, repair
or alteration by anyone other than JCS or an authorized JCS
service center. Further, the warranty does not cover: Acts of
God, such as fire, flood, hurricanes and tornadoes.
What are the limits on JCS’s Liability?
JCS shall not be liable for any incidental or consequential
damages caused by the breach of any express, implied or
statutory warranty or condition.
Except to the extent prohibited by applicable law, any
implied warranty or condition of merchantability or fitness
for a particular purpose is limited in duration to the
duration of the above warranty.
JCS disclaims all other warranties, conditions or
representations, express, implied, statutory or otherwise.
JCS shall not be liable for any damages of any kind
resulting from the purchase, use or misuse of, or inability to
use the product including incidental, special, consequential
or similar damages or loss of profits, or for any breach of
contract, fundamental or otherwise, or for any claim
brought against purchaser by any other party.
Some provinces, states or jurisdictions do not allow the
exclusion or limitation of incidental or consequential damages
or limitations on how long an implied warranty lasts, so the
above limitations or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may
also have other rights that vary from province to province,
state to state or jurisdiction to jurisdiction.
How to Obtain Warranty Service
In the U.S.A.
If you have any question regarding this warranty or would
like to obtain warranty service, please call 1-800-253-2764
and a convenient service center address will be provided
to you.
In Canada
If you have any question regarding this warranty or would
like to obtain warranty service, please call 1-800-253-2764
and a convenient service center address will be provided
to you.
In the U.S.A., this warranty is offered by Sunbeam
Products, Inc. doing business Jarden Consumer Solutions
located in Boca Raton, Florida 33431. In Canada, this
warranty is offered by Sunbeam Corporation (Canada)
Limited doing business as Jarden Consumer Solutions,
located at 20 B Hereford Street, Brampton, Ontario L6Y
0M1. If you have any other problem or claim in connection
with this product, please write our Consumer Service
Department.
PLEASE DO NOT RETURN THIS PRODUCT TO ANY
OF THESE ADDRESSES OR TO THE PLACE OF
PURCHASE.
© 2008 Sunbeam Products, Inc. doing business as
Jarden Consumer Solutions. All Rights Reserved.
Distributed by Sunbeam Products, Inc. doing business as
Jarden Consumer Solutions, Boca Raton,
Florida 33431
.
BCM7203/BCM7203RCCN08EFM1 Printed in China
Figure 3
Troubleshooting
Trouble
• Unit does not turn on.
• Mist output minimal to none.
• Water leaks from reservoir.
• Filter turns brown.
• Film on water reservoir.
• Water in reservoir appears
cloudy.
• Unit cycles on/off.
• Very tight reservoir cap.
• FilterCheck™ is not
working.
Probable Cause
☛ Water spilled in humidistat.
☛ Circuit breaker has been
tripped.
☛ Filter has not absorbed
water.
☛ Mineral buildup in tray.
☛ Humidistat is set too low.
☛ Filter needs to be
replaced.
☛ Rubber reservoir ring is
missingor improperly
placed.
☛ Cap not tight enough.
☛ The filter needs to be
replaced.
☛ Short filter life.
☛ Mineral deposits cause
film on reservoir to build
up.
☛ Filter needs to be
replaced.
☛ Water reservoir filled with
warm water.
☛ Humidifier is reacting to
room.
☛ Reservoir cap over
tightened.
☛ Takes 60 minutes to
register.
Solution
✔ Drain water from base
and allow unit to dry for
30 minutes.
✔ Check circuit breaker.
✔ Wait 30 minutes before
starting humidifier.
✔ See Weekly Maintenance
under Cleaning and
Maintenance Instructions.
Regular cleaning is
recommended to keep the
unit functioning properly.
✔ Raise the level of humidity
by adjusting the
humidistat (see Operating
Instructions).
✔ Replace your filter
(BWF100) by calling
1-800-253-2764, or visit
www.bionaire.com.
✔ Remove reservoir cap
then replace or reposition
ring.
✔ Tighten the cap.
✔ Replace your filter
(BWF100) by calling
1-800-253-2764, or visit
www.bionaire.com.
✔ In areas with hard water
the filter will need to be
changed more frequently.
✔ See Daily Maintenance
under Cleaning and
Maintenance instructions.
Regular cleaning is recom
mended to keep the unit
functioning properly.To order
Clean Away™ (DMS216),
call 1-800-253-2764, or
visit www.bionaire.com.
✔ Replace your filter
(BWF100) by calling
1-800-253-2764 or visit
www.bionaire.com.
✔ Use cool water to fill the
water reservoir – and only
use Bionaire
®
products
recommended in this
manual.
✔ Set the digital Humidistat
to a higher or lower
desired setting.
✔ Add liquid soap to cap
gasket to ease opening.
✔ Allow the humidifier to
run continuously for 60
minutes for the
FilterCheck™ Indicator to
reflect the filter condition.
FREQUENTLY ASKED QUESTIONS
Question
• What are the variables that
affect run time?
• How do I remove film on
water tank?
• How can I extend the run
time?
ANSWER
☛ The estimated run time for this humidifier is based on
average room conditions. The actual run time of your
humidifier is dependent on numerous variables such
as:
1. Air exchange in the room where the humidifier is
placed.
2. Room construction where the humidifier is placed.
3. Temperature of the room where the humidifier is
placed.
4. Humidity levels in the room where the humidifier is
placed.
5. Movement of occupants and the opening and closing
of doors in the room where the humidifier is placed.
6. Home furnishings in the room where the humidifier is
placed.
☛ See Daily Maintenance instructions. Regular cleaning
is recommended.
☛ Run your unit on the lowest setting.
☛ If your unit has electronics, set it to your desired
humidity level. The unit will turn on and off, which will
extend the run time.
☛ Fill the tank all the way full, place it on the base, let
the water empty into the base until it stops bubbling,
then refill the tank full again. This ensures maximum
water capacity and will extend run time.
A
B
D
E
F
C
A. Water Tank
B. Carry Handle
C. Filtercheck
TM
Indicator
D. Humidifier Housing
E. SmartTouch™
Control Panel
F. Humidifier Base
Figure 1
BCM7203-BCM7203RC-CN_08EFM1.qxd:BWM2600-UC_07EFM1.qxd 6/19/08 2:09 PM Page 1