Filter
Top Products
~
~edett
ModelSM
OIL BURNER
The adaptable, efficient Model 8M burner is
not dependent upon a combustion chamber
for flame stabilization. Instead, it's avail-
able with a choice of six flame-retention
heads that lock a highly stable, fuel-efficient
flame in place forreliable combustion. These
one-piece, stainless steel heads are a pri-
mary reason why the Model 8M can provide
fuel savings of up to 35%! All heads fit a
standard 4-inch diameter air tube and are
easily installed for optimizing performance
in a variety of applications.
~
The specially designed burner housing en-
hances operating efficiency while it mini-
mizes air noise. This sturdy housing and
rugged motor and controls give the Model
8M thedurabilityand dependabilitydemanded
by today's tough burner applications.
Specifications
Capacities-Model 8M
0.50 to 3.00 gallons per hour
70,000 to 420,000 BTU/hr input
Fuels
No.1 or No.2 heating oil (ASTM D396) only
Dimensions (standard)
Height: 13-1/2"
Width: 14-114"
Depth: 8-1/2" (chassis only)
Electrical Characteristics
Motor: 3450 rpm, NEMA M-flange,
manual reset overload protection
120 V.l60 Hz.ll phase
10,000 V.l23 ma. secondary,
continuous duty shielded
transformer
Operating Load: 5.8 amps (maximum)
Alternate Voltages
or Frequency: Consult Customer Service
Fuel Unit
Single stage or two stage
Power Supply:
Ignition:
Flame
Retenti.on
Heads
-
FO 0.50 - 0.85 gph
~
R.W. BECKETT CORPORATION
U.S.A.: P.O. Box 1289 oElyria, Ohio 44036' 800-645.2876' (440) 327-1060' FAX (440) 327-1064
Canada: R.W. Beckett Canada, Ltd.' Unit 3.430 Laird Road' Guelph, Ontario, N1G 3X7' 800-665-6972' FAX (519) 763-5656