Filter
Top Products
1
Propane Restrictor
Conversion Kit
Product Description
The Beckett Propane Restrictor Conversion Kit allows for the conversion of CG10, CG15, CG25, and CG50 burners
for use with propane gas. With the proper installation of the restrictor and attached O-ring, adjustments and settings
for propane use will be the same as the adjustments and settings for natural gas use as detailed in the burner manual.
Installation
Note that Steps 1 and 2 on the reverse side refer to fully
assembled burners. Skip to Step 3 when converting a
burner without the air tube assembly installed. Refer to
Figures 1 and 2 when performing the following steps.
Figure 1 - Components
Figure 2 - Assembly Location
This conversion kit shall be
installed by a qualifi ed service
WARNING
agency in accordance with the manufactur-
er’s instructions and all applicable codes
and requirements of the authority having
jurisdiction. (In Canada, in accordance with
the requirements of the CAN/CGA-B149 Installation
Code.) If the information in these instructions is not
followed exactly, a fi re, explosion, or production
of carbon monoxide may result causing property
damage, personal injury or loss of life. The qualifi ed
service agency is responsible for the proper instal-
lation of this kit. The installation is not proper and
complete until the operation of the converted appli-
ance is checked, as specifi ed in the manufacturer’s
instructions supplied with the kit.
Please carefully read and comply with the instruction
manual supplied with the specifi c burner being convert-
ed.
CG15 is shown in the illustrations.
CG25 and CG50 are similar. CG10 is
NOTICE
similar with the exception of having the gas gun assem-
bly mounted into the air tube instead of the housing.
Major Component Key for All
Illustrations
E External Gas Manifold
F Propane Restrictor
G Restrictor O-ring
H Gas Tube O-ring
Major Component Key for All
Illustrations
A Air Tube
B Jacking Screw
C Internal Gas Tube
D Burner Housing