Filter
Top Products
5 Installation (Continued)
3
Attach Mounting Bracket Using ‘L’ Shaped Anchors - New Concrete
1. Pour concrete at least 6 inches deep. 2. Insert anchors into curing concrete. Leave
at least 1 inch exposed.
3. Once concrete has cured attach anchor and
tighten nuts onto mounting bracket.
4
Attach Post to Mounting Bracket
1. Align post to mounting bracket and attach post to mounting bracket with four post mounting screws.
5
Install Pushplate
1. Thread the pushplate screws into the mounting box leaving a majority of the screw exposed. Attach the pushplate to the mounting screws,
then use the hex key provided to fully tighten the screws. Refer to the appropriate Pushplate User’s Guide for detailed installation and setup
instructions.
PUSHPLATE INSTALLATION DUAL PUSHPLATE INSTALLATION PANTHER PUSHPLATE INSTALLATION
6”
1” EXPOSED
75.0131.05 20080606 Page 3 of 4