Avanti PAC12000 Air Conditioner User Manual


 
14
Draining condensed water step by step
Drainage Hole
Rubber Plug
Drainage Knob
Water Plate
1. Turn off the unit.
2. Place the Water Drain Tray underneath the Drainage Pipe.
3. Remove the Drainage Knob and the Rubber Plug, then condensed water will automatically flow out.
4. If the Water Drain Tray gets full, push the Rubber Plug back to the Drainage Pipe and empty the
tray.
5. Repeat steps 2, 3 and 4, until all the condensed water in the unit is drained.
6. Put back the Rubber Plug and the Drainage Knob to the Drainage Pipe.
7. Restart the unit
End-of-Season Care
Operate the air conditioner, in FAN mode alone, for half a day to dry out the inside of the unit.
Turn off power and remove plug from wall socket.
Clean filter.
Drain.
Store in dry location.