ATEN Technology EC2004 Indoor Furnishings User Manual


 
EC1000 / EC2004 User Manual
52
Upgrading the Firmware
To upgrade the firmware refer to the screen shot on the preceding page, and do
the following:
1. Go to our website and download the new firmware file to a convenient
location on your computer.
2. Click the Browse button; navigate to where the firmware file is located
and select it.
3. Click Upgrade to start the upgrade procedure.
If you enabled Check Main Firmware Version the current firmware
level is compared with that of the upgrade file. If the current version is
equal to or higher than the upgrade version, a popup message appears,
to inform you of the situation and stops the upgrade procedure.
If you didn't enable Check Main Firmware Version, the upgrade file
is installed without checking what its level is.
Once the upgrade completes successfully, the EC1000 resets itself.
4. Login again, and check the firmware version to be sure it is the new one.
Firmware Upgrade Recovery
Should the EC1000’s firmware upgrade procedure fail, and the device becomes
unusable, the following firmware upgrade recovery procedure will resolve the
problem:
1. Power off the device.
2. Press and hold the Reset Switch (see page 7).
3. While holding the Reset Switch in, power the switch back on.
This causes the Energy Box to use the original factory installed main firmware
version. Once the EC1000 is operational, you can try upgrading the main
firmware again.
F/W Version Displays the EC1000 ‘s current firmware version.
Filename As new versions of the firmware become available, they are
posted on our website and can be downloaded to a convenient
location on your computer. Click the Browse button to select the
downloaded upgrade file.
Upgrade Click this button to upgrade the firmware of the selected devices.
Item Description