ATEN Technology EC2004 Indoor Furnishings User Manual


 
Chapter 2. Hardware Setup
17
Securing the Sensors
Connect the sensors to the EC1000 Energy Box’s rear environmental sensor
ports and secure them using sensor mounts, tie wraps, and adhesive cable tie
holders. If you use a tie wrap to secure the sensor, tighten the tie wrap over the
recessed channel on the sensor, as shown in the following diagram:
Note: 1. The sensors shown in the above diagram are for reference purposes
only. The sensors for the EC1000 / EC2004 may look slightly
different.
2. Depending on the model and type of sensor, sensor mounts, tie wraps,
and adhesive cable tie holders may or may not be provided in the
package.