Filter
Top Products
11
Chapter 2
Hardware Setup
Rack Mounting
The EC1000 / EC2004 can be mounted in a 19” (1U) rack or in an 0U
configuration mounted to the side of the rack. To rack mount the device, use
the rack mounting brackets that came with your device. The brackets are
screwed to the front, rear or middle sides of the device, depending on the
installation type and then the unit can slide into the front of the rack, or mount
to the side of the rack, as shown in the diagrams below:
Rack Mounting - Front
1. Use 3 M3 x 8 Phillips hex head screws supplied with the rack mounting kit
to screw the rack mounting brackets into the sides near the front of the
unit.
2. Position the unit in the front of the rack and align the holes in the mounting
brackets with the holes in the rack.
1. Important safety information regarding the placement of this
device is provided on page 91. Please review it before proceeding.