Filter
Top Products
EC1000 / EC2004 User Manual
10
EC2004 Rear View
*External sensors are sold separately (see Optional Accessories, page 6).
No. Component Description
1 Grounding Terminal The wire used to ground the Energy Box attaches here.
2 Energy Sensor Ports The four RJ-45 cables that connect the Energy Box to
your Energy PDUs, plug in here. The electrical
measurements are as follows:
Port 1 Voltage / Amps
Port 2 Amps
Port 3 Voltage / Amps
Port 4 Amps
3 Environmental Sensor
Ports
External sensors plug into these four RJ-11 ports.*
4 Power Jack The power adapter cable plugs into this jack.
5 LAN Port The cable that connects the Energy Box to the LAN
plugs in here.
6 Door Sensor Port This 4-pin dry contact port is for a door sensor which
allows the monitoring of a rack mounted enclosure’s
door access to notify users when a door has been
opened. See Door Sensor, page 6, for details.
1
2
3
4
5
6