Filter
Top Products
Chapter 1. Introduction
7
Components
EC1000 Front View
No. Component Description
1 Readout Section
The first single-digit LED indicates the port selected:
Energy Sensor (1-4)
Environmental Sensor (1-4)
IP Address (1)
The second 3-digit LED displays information related to
the first LED:
Current
Temperature, Humidity, Differential Pressure
IP Address
2 Energy and
Environmental Sensor
LEDs
Lights (Orange) for connected Energy Sensors and
(Green) for Environmental Sensors, currently connected
to a port and taking readings.
3 Selection LED Lights (Green) to indicate the selection (Energy,
Environment, IP) that the Readout is currently displaying.
4 Select Button Press the Select button to cycle through the selections
(Energy, Environment, IP) to display their data readout
on the 3-digit LED.
5 Reset Switch This switch must be pushed with a thin object, such as
the end of a paper clip.
Press and release to reboot the device.
Press and hold for more then three seconds to
reset the Energy Box to its factory default settings
6 Power LED Lights (Green) when the Energy Box is powered up and
ready to operate.
1
2
3
4
5
6