Filter
Top Products
Appendix
99
IPv6
At present, the EC2004 does not support IPv6 but we intend to enable this
feature in the near future. For more information, please check our website for
the latest EC2004 firmware updates.
Link Local IPv6 Address
At power on, the EC2004 is automatically configured with a Link Local IPv6
Address (for example, fe80::210:74ff:fe61:1ef). To find out what the Link
Local IPv6 Address is, log in with the EC2004 IPv4 address and open the Setup
→ Device Configuration page. The address is displayed in the IPv6 section.
Once you have determined what the IPv6 address is, you can use it when
logging in from a browser or the Win and Java Client AP programs.
For example:
If you are logging in from a browser, you would key in
http://[fe80::2001:74ff:fe6e:59%5]
for the URL bar.
Note: 1. To log in with the Link Local IPv6 Address, the client computer must
be on the same local network segment as the EC2004
2. The %5 is the %interface used by the client computer. To see your
client computer’s IPv6 address: from the command line issue the
following command: ipconfig /all. The % value appears at the
end of the IPv6 address.