Filter
Top Products
Appendix
97
IP Address Determination
If you are an administrator logging in for the first time, you need to access the
Energy Box in order to give it an IP address that users can connect to. There
are two methods to choose from. In each case, your client computer must be on
the same network segment as the Energy Box. After you have connected and
logged in you can give the device its fixed network address. (See IPv4
Configuration, page 37)
Method 1:
For computers running Windows, an IP address can be determined and/or
assigned with the IP Installer utility. The utility can be obtained from the
Download area of our web site or from the software CD. Look under Driver/
SW, and the model of your device. After downloading the utility to your
computer, do the following:
1. Unzip the contents of IPInstaller.zip to a directory on your hard drive.
2. Go to the directory that you unzipped the IPInstaller program to and run
IPInstaller.exe. A dialog box similar to the one below appears:
(Continues on next page.)