Applica LMT255 Pet Care Product User Manual


  Open as PDF
of 2
 
Getting Started
Make sure you have all of the parts listed below
Transparent tubes (2)
Metallic rod
Curved tubes (already preassembled in kabana)
Preassembled Kabana
1.
2.
3.
4.
Models
LMT255
LME9000MW
LME9250
1. Insert the metallic rod through the
looped fabric located on top of the
preassembled kabana (A).
Kitty Kabana
LITTER BOX COVER
™
1
2
3
4
A
B
C
2. Position the ends of the metallic rod over the curved tubes that are already
preassembled inside the kabana (B).
3. Press the ends of the metallic rod into the curved tubes, (where the kabana's fabric
has an opening), until it snaps into place (C).
Note: The two remaining transparent tubes are installed at the end.
D
How to install the LitterMaid Kitty Kabana™ onto
your LitterMaid® Litter Box
1. Remove the 4 plugs located on the corners of the litter box's top housing (D).
To Assemble