Apple Rack Mount Kit Indoor Furnishings User Manual


 
073-0689 Rev. B
Xserve
Rack Mount Kit
Replacement Instructions
The brackets and screws necessary to attach an Xserve to a rack are enclosed. You need
to supply medium-sized and very small Phillips screwdrivers for the installation.
Instructions for installing the rack mount kit are included in Chapter 3, “Installing Your
Server in a Rack,” of the
Xserve User’s Guide
that came with your server. The chapter
covers instructions for both four-post and two-post racks.
Apple Computer, Inc.
© 2003 Apple Computer, Inc. All rights reserved.
This document is protected under U.S. Copyright Law and International Treaties, and no
part of this document may be reproduced in any form without written permission from
Apple.
Apple is not responsible for typographical, printing, or inadvertent errors.
Apple Computer, Inc.
1 Infinite Loop
Cupertino, CA 95014-2084
USA
+ 1 408 996 1010
http://www.apple.com
Apple, the Apple logo, Mac, Macintosh, and the Mac logo are trademarks of Apple
Computer, Inc., registered in the U.S. and other countries. Xserve is a trademark of Apple
Computer, Inc.