Filter
Top Products
Revised June 1999 (Reviewed July 2003) A 011.4
LIMITED WARRANTY OUTLINE
If the heat exchanger modules should fail within 5
years, under the terms of the warranty, A.O. Smith
will furnish a replacement part; installation, labor,
handling and local delivery extra. If the tank should
leak any time during the first 5 years, under terms of
the warranty, A.O. Smith will repair or replace the
tank; installation, labor , handling and local delivery
extra. THIS OUTLINE IS NOT THE WARRANTY.
For complete information, consult the boiler and
tank warranties or information, consult the boiler
and tank warranties or A.O Smith Water Products
Company.
Hot Water Supply Systems
The "TOTAL SYSTEM" Concept- We have taken our highly
efficient equipment and created a convenient package; a
complete domestic hot water system.
Simplifies Installation- The installer simply connects the flue,
gas, electric supply, cold water make-up, and hot water supply
(Building return loops connect to cold water make-up.)
Eliminates Costly Field Errors- These complete hot water
systems are factory-engineered and assembled to assure
proper pipe, pump and wiring sizing. Systems are pre-piped and
wired to guarantee maximum system efficiency.
Factory Tested- Each Ac-U-Temp system is hydrostatic and
fire tested before shipping from the factory.
Ac-U-Temp Storage Tanks- Each Ac-U-Temp storage tank is
especially designed with tank opening locations, that provide
maximum tank draw efficiency and eliminate any unnecessary
piping and connections. Standard Ac-U-Temp tanks are factory
jacketed and insulated (Bare tanks to be insulated by others are
also available.) The Ac-U-Tanks are factory standard with the
same superior glass lining that has set new standards for the
tank industry. Standard tank capacities range from 80 gallons to
1,000 gallons (Custom tanks to 10,000 gallons are available).
Other Features
ASME Temperatures and Pressure Relief Valve 125# - Tank
Temperature Sensor- Tank Thermometer- Isolation Valves
(Reliable Ball Valves) - Superior I-Beam Skid - 125 psi Tank
Construction - CI Bronze Fitted Pump.
Options- All Bronze Circulating Pump - Sequencing Control
Panel (For Multi-Boiler systems) - 150 and 160 psi Tank
Construction - 11" x 15" Manholes- Cement and Epoxy Tanks
Linings.
Custom Ac-U-Temp Systems- All Ac-U-Temp Systems are
built to order, and can be precisely designed to specifically meet
your specifications. Many combinations of boilers and tanks are
available. Consult your local A.O. Smith Representative for
factory assistance.
Multi-Boiler SystemS- High recovery systems that can meet
any hot water demand. Systems can be designed to provide 50
to 100% back-up. Boilers can be on & off fired, or sequenced to
meet changing system demands. Sequenced multi-boiler
systems that employ relatively small storage tanks are ideal for
applications with constant, yet fluctuating hot water demands.
Multi-Tank Systems- For applications with low ceiling heights
or unique installation challenges.
CONSERVATIONIST
®
COMMERCIAL BOILERS
Optional Dual Energy Source Capability - Ac-U-Temp storage
tanks can be specified with heat exchangers; allows winter/
summer heating boiler operation. Both, water to water, or steam
to water exchangers are available in both single wall and double
wall. Complete control packages can be factory installed for hook-
up and run capability.
Electric Back-up - Heavy - duty electric water heater elements
and controls can be specified for up to 3,000 KW; 100% electric
back-up. Provides hot water even during natural gas curtailments.