American Standard T373.732 Thermostat User Manual


 
F25
© 2008 AS America Inc.
ENFIELD
CENTRAL THERMOSTAT
LESS VOLUME CONTROL
242mm
(9-5/8)
MODEL NUMBER:
TRIM KITS:
T373.732 Central Thermostat Trim Kit
Less volume control. With Cross handle. LESS Valve.
T373.730 Central Thermostat Trim Kit
Less volume control. With Lever handle. LESS Valve.
ROUGH VALVES:
R510 Rough Valve Body only
1/2" NPT inlets/outlets. LESS Trim.
R530 Rough Valve Body only
3/4" NPT inlets/outlets. LESS Trim.
NOTE:
Requires separate on/off volume control.
When used as a Bath/Shower:
EITHER
- a separate diverter valve (such as R420 or R430)
OR
- a diverter tub spout (requires twin ell - Model #8888.120)
IS REQUIRED
SUGGESTED SPECIFICATION:
Central Thermostat shall feature a cast brass valve body. Thermostat shall be a wax element shuttle valve. Shall also feature 1/2"
or 3/4" NPT inlets and outlets. Fitting shall be American Standard Model # T373.73X.____ (Trim Kit) and R510 or R530 (Rough Valve).
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASSE 1016
ASME A112.18.1
CSA B125
PRODUCT FEATURES:
Brass Casting: Highest quality faucet material for durability
& long life.
Wax Thermostatic Unit:
Permits shuttle valve to move
between the hot and cold seats to maintain the pre-selected
constant water temperature.
Back to Back Capable:
Hot and cold can be reversed.
Spring-Loaded Check Valves: When the hot and cold
water enters the fitting, both supplies pass through the
spring-loaded check valves to prevent cross flow of hot and
cold water.
Integrated Stop Valves: Ensure easy cleaning and servicing.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding. Maximum water temperature limit may be
reduced to 104 or 109 degrees Fahrenheit.
T373.732
*
Central Thermostat Trim Kit. Less volume control. Cross Handle.
151mm
(5-7/8)
86mm
(3-3/8)
25mm
(1)
34mm
(1-3/8)
193mm
(7-5/8)
150mm
(5-7/8)
48mm to 68mm
(2 to 2-5/8)
R510
1/2 NPT
R530
3/4 NPT
R510
1/2 NPT
R530
3/4 NPT
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0
5
10
15
20
25
10080604020
3/4"
1/2"
*NOTE:When used as a Bath/Shower a separate diverter valve is required (such as 1660.430 or 1660.440).
Requires twin ell twin ell - (Model #8888.120 - must be ordered separately) for use with diverter spouts.
Requires separate on/off volume control.
Finish Options
Product
Number
Description
T373.730
*
Central Thermostat Trim Kit. Less volume control. Lever Handle.
Polished
Chrome
002
Polished
Nickel
008
PVD
Satin
Nickel
PVD
Blackened
Bronze
295068
R510
R530
Rough Valve Body less trim.
1/2" inlets/outlets.
Rough Valve Body less trim.
3/4" inlets/outlets.
** ROUGH & TRIM MUST BE ORDERED SEPARATELY.
T373.730 Shown
TRIM KITS**
Product
Number
Description
ROUGH VALVE
BODIES
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
GENERAL DESCRIPTION:
Cast brass valve body. The single unit contains one
handle, which sets the desired temperature. The
temperature is maintained by a wax element moving a
shuttle valve between hot and cold. Includes Hot Limit
Safety Stop. Maximum temperature limit is 112°F.
Escutcheon plate is stamped brass. Available with 1/2"
or 3/4" NPT inlets and outlets. The valve has a high flow
rate, ideal for mutiple outlet installations.