Filter
Top Products
F3
© 2008 AS America Inc.
150mm
(6)
NOTE: FITTING
MUST BE INSTALLED
WITH VOLUME CONTROL
ON TOP.
SUGGESTED SPECIFICATION:
Two handle Thermostat shall feature a cast brass valve body. Thermostat shall be a wax element shuttle valve. Shall also
feature ceramic disc valving, 1/2" NPT or 3/4" NPT inlets and outlets. Fitting shall be American Standard Model
# T050.541.___ (Trim Kit) and R520 or R540 (Rough Valve Body).
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASSE 1016
ASME A112.18.1
CSA B125
PRODUCT FEATURES:
Brass Casting: Highest quality faucet material for durability &
long life.
Wax Thermostatic Unit: Permits shuttle valve to move
between the hot and cold seats to maintain the pre-selected
constant water temperature.
Back to Back Capable: Hot and cold can be reversed.
Spring-Loaded Check Valves:
When the hot and cold water
enters the fitting, both supplies pass through the spring-loaded
check valves to prevent cross flow of hot and cold water.
Integrated Stop Valves: Ensure easy cleaning and servicing.
Adjustable Hot Limit Safety Stop: Limits the amount of hot
water allowed to mix with cold. Reduces the risk of accidental
scalding. Maximum water temperature may be reduced to 104 or
109 degrees Fahrenheit.
T050.541
*
Two-handle Thermostat Trim Kit with separate volume control.
R540
Rough Valve Body less trim - 3/4" NPT inlets/outlets.
R520
Rough Valve Body less trim - 1/2" NPT inlets/outlets.
*
NOTE: When used as a Bath/Shower a separate diverter valve is required (such as1660.430).
Requires twin ell ( Model #8888.120 - must be ordered separately) for use with diverter spouts.
Use one discharge port only. Plug is provided.
O
F
F
O
N
C
O
L
D
H
O
T
T
E
M
P
150mm
(5-7/8)
220mm
(8-5/8)
FLOW RATE*
GALLONS PER MINUTE
I NL ET PR ES SU RE ( PS I)
*Flow rates shown are for mixed hot and cold.
0
5
10
15
20
25
12010080604020
TEMP
GENERAL DESCRIPTION:
Cast brass valve body. The single unit contains two
handles, the lever handle sets the desired temperature
and the metal cross handle functions as an on/off,
volume control. The temperature is maintained by a wax
element moving a shuttle valve between hot and cold.
The volume is controlled by twin ceramic disc valve
cartridges. Ceratherm includes Hot Limit Safety Stop.
Maximum temperature limit is 112°F. Escutcheon plate is
stamped brass. Available with 1/2" or 3/4" NPT inlets
and outlets.
The valve has a high flow rate, ideal for
mutiple outlet installations.
MODEL NUMBER:
TRIM KITS:
T050.541 Two-Handle Classic Thermostat Valve Trim Kit
With separate volume control. LESS valve.
ROUGH VALVES:
R520 Rough Valve Body only
1/2" NPT inlets/outlets. With separate volume control.
L
ESS
Trim.
R540 Rough Valve Body only
3/4" NPT inlets/outlets. With separate volume control.
L
ESS
Trim.
NOTE:
• When used as a Bath/Shower:
EITHER
- a separate diverter valve (such as R420 or R430)
OR
- a diverter tub spout (requires twin ell - Model #8888.120)
IS REQUIRED
R520
1/2" NPT INLETS
or
R540
3/4" NPT INLETS
**
ROUGH & TRIM MUST BE ORDERED SEPARATELY.
Finish Options
Product
Number
Description
Polished
Chrome
002
PVD
Polished
Brass
099
PVD
Satin
Nickel
295
TRIM KITS**
Product
Number
Description
ROUGH VALVE
BODIES
186mm
(7-3/8)
100mm
(3-7/8)
48mm to 68mm
(2 to 2-5/8)
25mm
(1)
FINISHED
WALL
CERATHERM
TWO-HANDLE CLASSIC THERMOSTAT
WITH SEPARATE VOLUME CONTROL