American Standard M968412A Indoor Furnishings User Manual


  Open as PDF
of 4
 
Certified to comply with ASME A112.18.1M
Plumbers' Putty or Caulking
Adjustable Wrench
Channel Locks
TOOLS REQUIRED
1
INSTALL FAUCET
4
5
Install LOCK NUT (1) and RUBBER WASHER (2) onto SPOUT BODY (3).
Insert SPOUT BODY (3) through mounting hole from underside of SINK.
From under sink tighten LOCK NUT (1) to secure SPOUT BODY (3).
Make sure O-RING (6) is in place. Thread SPOUT ASSEMBLY (7) onto SPOUT
ESCUTCHEON (5) and hand tighten.
7
6
Place RUBBER RING (4) into SPOUT ESCUTCHEON (5) and thread ESCUTCHEON (5)
onto SPOUT BODY (3) until snug against internal stop.
2
1
3
Phillips Screwdriver
Flat Blade Screwdriver
by
COLLECTION
™
THE
4251
Thank you for selecting American-Standard...the benchmark of
fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please read
these instructions carefully before you begin.
BOTTOM MOUNT KITCHEN FAUCET
Turn off hot and cold water supplies before beginning.
CAUTION
Installation
Instructions
M968412A
Tubing Cutter
next