Filter
Top Products
J23
BARRIER FREE
© 2008 AS America Inc.
HERITAGE™
COUNTERTOP SINK
VITREOUS CHINA
HERITAGE™ COUNTERTOP SINK
• Large, oval drop-in sink made from vitreous china
• Self-rimming with cutout template supplied
• Dual front overow
• Large deck area (faucet not included)
❏ 0456.017 Faucet holes on 8" (203mm) centers
(illustrated)
❏ 0456.013 Center hole only
Nominal Dimensions:
660 x 495mm
(26" x 19-1/2")
Bowl sizes:
457mm (18") wide
305mm (12") front to back
152mm (6") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
495mm
(19-1/2)
203mm
(8)
1-1/4 O.D.
WASTE OUTLET
1-1/4 O.D.
TAILPIECE
SEALING COMPOUND
660mm
(26)
COUNTERTOP
(BY OTHERS)
343mm
(13-1/2)
279mm
(11)
76mm(3)
OPTIONAL
(3) 35mm(1-3/8)
DIA. HOLES
191mm
(7-1/2)
FINISHED WALL
OR SPLASH BACK
*
*
SUPPLIES
AS REQUIRED
787mm
(31)
SUGGESTED
197mm
(7-3/4)
178mm
(7)
FINISHED FLOOR
16mm
(5/8)
102mm
(4)
102mm
(4)
Revised 2/08