American Standard ASME A112.19.2M Indoor Furnishings User Manual


 
K63
© 2006 American Standard Inc.
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of  xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
305mm
(12)
749mm
(29-1/2)
C/L OF OUTLET
83mm
(3-1/4)
FINISHED WALL
222mm
(8-3/4)
19mm ± 6mm
(3/4 ± 1/4)
381mm
(15)
C/L
470mm
(18-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
305mm
(12)
178mm
(7)
16mm
(5/8)
FINISHED
FLOOR
737mm
(29)
241mm
(9-1/2)
152mm
(6)
476mm
(18-3/4)
222mm
(8-3/4)
SUPPLY
AS
REQ'D
381mm
(15)
*
To Be Speci ed:
Color:
Seat: American Standard #5324.019 “Rise and
Shine" solid plastic, closed front, elongated seat
with cover.
Seat: American Standard #5311.012 “Laurel"
molded closed front seat with cover.
Alternate Seat:
Supply with stop:
Revised 5/05
RAVENNA™
ELONGATED TOILET
VITREOUS CHINA
RAVENNA™ ELONGATED TOILET
2642.016
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Elongated siphon action jetted bowl
• Fully glazed 2" trapway
• AquaForce  ushing technology
• Styled tank w/ tted tank cover
• Chrome trip lever
• Speed Connect™ tank/bowl coupling system
• Sanitary bar on bowl
• 2 color matched bolt caps
• 100% factory  ush tested
• Design coordinated to Ravenna
pedestal lavatory
3459.016 Bowl
4096.016 Tank
Alternate Tank:
4096.516 with Aquaguard tank liner
Nominal Dimensions:
749 x 476 x 737mm
(29-1/2" x 18-3/4" x 29")
Fixture only, seat and supply by others
Compliance Certi cations -
Meets or Exceeds the Following Speci cations:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions