American Standard 9420.000 Indoor Furnishings User Manual


  Open as PDF
of 1
 
I24
© 2008 AS America Inc.
Revised 2/08
RETROSPECT COLLECTION
®
WASHSTAND
FIRE CLAY/WOOD
RETROSPECT COLLECTION
®
WASHSTAND
• Retrospect Collection
®
pedestal top with period
reproduction of classic dry sink wood washstand
• Washstand/pedestal top with faucet holes on
8" (203mm) center
• Turned leg detailing with lower drawer storage in
White nish
• Select hardwood solids construction
• Right Height™ for greater comfort during use
• Part of design matched Retrospect Collection
®
Separate Components:
❏ 0282.008 Washstand/Pedestal top
8" (203mm) centers
❏ 9420.000 Washstand only
Nominal Dimensions with Sink:
27" x 19-3/4" x 36"
(686 x 502 x 914mm)
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.9M for Non-
Ceramic Fixtures
• CAN/CSA B45 Series
To Be Specied:
❏ Color: White only
❏ Recommended Faucet: 2373.701
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap: 752683-495
❏ P Trap Finish:
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP ARE
SUGGESTED.
▼ ANCHOR SCREWS FOR LAVATORY AND PEDESTAL NOT INCLUDED.
- FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.9M.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
FINISHED WALL
*
*
1-1/4 O.D.
WASTE
SUPPLIES
AS REQ'D
FINISHED
FLOOR
FINISHED
WALL
9"
(229mm)
7"
(178mm)
19-3/4"
(502mm)
27"
(686mm)
8"
(203mm)
13-3/4"
(349mm)
3-3/8"
(86mm)
1-3/4" DIA.
STD. DRAIN
OUTLET
3/8" (10mm) DIA.
SINK ANCHOR
SCREW HOLES
ON 13-3/4" (349mm)
CENTERS
36"
(914mm)
24"
(610mm)
22"
(559mm)
1-1/4" O.D.
TAILPIECE
8"
13-1/2"
(343mm)
(203mm)
3 Holes
1-3/8" (35mm) Dia.
15"
(381mm)
7-1/4"
(184mm)