American Standard 6581.015 Indoor Furnishings User Manual


  Open as PDF
of 1
 
M90
© 2008 AS America Inc.
MAYBROOK™
URINAL
VITREOUS CHINA
MAYBROOK™ 0.5 - 1.0 GPF WASHOUT URINAL
• Vitreous china
• Low-consumption (3.8 Lpf/1.0 gpf)
• Flushing rim
• Washout ush action
• Integral strainer
• 3/4" inlet spud
• Outlet spud with 1-1/2" tubing tailpiece
• Wall hanger
• Fixture only
• Meets ANSI ush requirements at 0.5 to 1.0 GPF
❏ 6581.015 Top spud
Nominal Dimensions:
324 x 324 x 457mm
(12-3/4" x 12-3/4" x 18")
Recommended working pressure – between
20 psi at valve when ushing and 80 psi static
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2 for Vitreous China Fixtures
Revised 11/08
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF “P” TRAP IS SUGGESTED.
“P” TRAP AND FLUSH VALVE NOT INCLUDED AND MUST BE ORDERED
SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen
❏ Flush Valve:
❏ American Standard Selectronic
™
#6063.101.002
DC Power (Top Spud)
❏ “P” Trap:
292mm
(11-1/2)
324mm
(12-3/4)
121mm
(4-3/4)
19mm (3/4) N.P.T. OR C.W.T.
SUPPLY TO FLUSH VALVE
K-2
HANGER
298mm
(11-3/4)
457mm
(18)
133mm
(5-1/4)
10mm
(3/8) D.
HOLES
171mm
(6-3/4)
1-1/2 O.D.
WASTE
1-1/2 O.D. TAILPIECE
32mm
(1-1/4)
*
298mm
(11-3/4)
292mm
(11-1/2)
324mm
(12-3/4)
3/4 SPUD
64mm (2-1/2)
FINISHED WALL
178mm
(7)
610mm
(24)
OPTIONAL
TO FINISHED
FLOOR