Filter
Top Products
HD-61
© 2008 AS America, Inc.
EASY TOUCH
SINGLE CONTROL KITCHEN FAUCET
WITH PULL-OUT SPRAY
MODEL NUMBER:
6310EZ Kitchen Faucet with Pull-out Spray
Escutcheon plate (use is optional). Polished Chrome finish.
PRODUCT FEATURES:
Oversize Button: Switches water flow from stream to spray
with just a touch.
Durable WhisperGlide Hose: For smooth, quite operation.
Easy to Install: Flexible supply hoses are factory-installed
for fast hook-up.
Ideal for Granite and Other Solid Surfaces: Mounts
without deck plate for single hole installation
Ceramic Disc Valve Cartridge: Provides a lifetime of
smooth handle operation and drip-free performance
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold to reduce the risk of
accidental scalding
Lifetime Warranty: On function & finish
SUGGESTED SPECIFICATION:
Single control kitchen pull-out faucet shall feature a swivel pull-out spray spout with two check valves, WhisperGlide™ hose,
metal escutcheon plate and handle. Shall also feature washerless ceramic disc valve cartridge with integral hot limit safety stop
and flexible supply hoses. Faucet shall be American Standard Model # 6310EZ.
6310EZ
Pull-out kitchen faucet. Polished Chrome finish.
GENERAL DESCRIPTION:
Metal body, handle, and escutcheon plate. Swivel pull-out
spray spout. Adjustable spray pattern with push button
activation. Washerless 47mm ceramic disc valve cartridge
with integral hot limit safety stop. Braided flexible supply
hoses with 3/8" compression connections. Brass mounting
shank with brass fixation ring. Complete with two integral
check valves. 2.2 gpm/8.3L/min. maximum flow rate. Fitting
can be mounted with or without escutcheon plate (escutcheon
size 10"L x 2-3/4"W).
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
144mm
(5-5/8)
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
NSF 61/Section 9
CSA B125
Product
Number
Description
211mm
(8-1/4)
508mm
(20)
224mm
(8-7/8)
127mm
(5)
227mm
(8-7/8)
254mm
(10)
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
35 to 38mm
(1-3/8 to 1-1/2)
DIA. MOUNTING
HOLE
58mm (2-1/4)
with escutcheon
70mm (2-3/4)
less escutcheon