Filter
Top Products
J17
© 2006 American Standard Inc.
PETAL™
ABOVE-COUNTER SINK
VITREOUS CHINA
PETAL™ ABOVE-COUNTER SINK
• Distinctive oral design in shape of petal
• Made from vitreous china
• Sink rim rises above counter or cabinet top
• Sink without over ow
❏ 0680.000
Nominal Dimensions:
400mm (15-3/4") Round
Bowl sizes:
318mm (12-1/2") round
95mm (3-3/4") deep
Compliance Certi cations -
Meets or Exceeds the Following Speci cations:
• ASME A112.19.2M for Vitreous China Fixtures
To Be Speci ed:
❏ Color:
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
IN-FIELD ADJUSTMENT OF POP-UP ROD EXTENSION REQUIRED.
PROVIDE A 2-1/2" OFF-SET BEND FOR PROPER OPERATION.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
Revised 5/05
COUNTERTOP
CUTOUT 267mm
(10-1/2) DIA.
76mm
(3)
76mm
(3)
SEALING
COMPOUND
178mm
(7)
FINISHED WALL
OR SPLASHBACK
203mm
(8)
1-1/4 O.D.
WASTE
SUPPLIES
AS REQ'D
*
159mm
(6-1/4)
*
216mm
(8-1/2)
COUNTERTOP
(BY OTHERS)
C/L
216mm
(8-1/2)
51mm
(2) MIN.
51mm
(2) MIN.
400mm REF.
(15-3/4)
203mm
(8)
(3) 32mm
(1-1/4) DIA. HOLES
432mm
(17)
1-1/4 O.D.
TAILPIECE
FINISHED
FLOOR
787mm
(31)
SUGGESTED