American Standard 0511.400 Indoor Furnishings User Manual


  Open as PDF
of 1
 
J25
BARRIER FREE
© 2008 AS America Inc.
REMINISCENCE™
COUNTERTOP SINK
VITREOUS CHINA
REMINISCENCE™ COUNTERTOP SINK
• Vintage-styled design with raised motif backsplash
• Made from vitreous china
• Self-rimming with cutout template supplied
• Design matched to Reminiscence toilet
• Front overow
• Faucet ledge
Shown with 3801.452 Amarilis Jasmine
faucet and handles (not included)
❏ 0511.800 Faucet holes on 8" (203mm) centers
(illustrated)
❏ 0511.400 Faucet holes on 4" (102mm) centers
❏ 0511.100 Center hole only
Nominal Dimensions:
565 x 457mm
(22-1/4" x 18")
Bowl sizes:
419mm (16-1/2") wide
254mm (10") front to back
152mm (6") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Silver ❏ Fawn Beige ❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP
ARE SUGGESTED.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
311mm*
(12-1/4)
260mm*
(10-1/4)
25mm
(1)
178mm
(7)
152mm
(6-3/4)
787mm
(31)
FINISHED
FLOOR
OPTIONAL
203mm
(8)
1-1/4 O.D.
TAILPIECE
1-1/4 O.D.
WASTE
SUPPLIES
AS REQ'D
COUNTERTOP
(BY OTHERS)
SEALING
COMPOUND
FINISHED WALL
OR SPLASHBACK
206mm
(8-1/8)
C/L
457mm
(18)
108mm
(4-1/4)
10mm
(3/8)
203mm
(8)
565mm
(22-1/4)
83mm
(3-1/4)
Revised 2/08