American Standard 0124.131 Indoor Furnishings User Manual


 
M26
© 2008 AS America Inc.
To Be Specied:
Color: White Bone Silver
Faucet*:
Faucet Finish:
Supplies:
1-1/4" Trap:
Nipple:
Concealed Arms Support (by others):
* See faucet section for additional models available
COMRADE™
WALL-HUNG LAVATORY
VITREOUS CHINA
COMRADE™ WALL-HUNG LAVATORY
Wall-hung sink
Vitreous china
Rear overow
Soap depression
Faucet ledge (faucet not included)
0124.024 With wall hanger (Illustrated)
Faucet holes on 102mm (4") centers
0124.131 For concealed arms support
Faucet holes on 102mm (4") centers
Nominal Dimensions:
508 x 464mm
(20" x 18-1/4")
Bowl sizes:
381mm (15") wide
276mm (10-7/8") front to back
159mm (6-1/4") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2 for Vitreous China Fixtures
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDE-
LINES AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Top of front rim mounted 864mm (34") from finished floor.
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP
ARE SUGGESTED.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
Revised 8/05
FINISHED
WALL
102mm
(4)
FINISHED
FLOOR
POP-UP WASTE
OUTLET 1-1/4 O.D.
DRAIN PLUG WASTE
OUTLET 1-1/4 O.D.
203mm
(8)
SUPPLIES
AS REQ'D.
203mm
(8)
508mm
(20)
64mm
(2-1/2)
171mm
(6-3/4)
464mm
(18-1/4)
267mm
(10-1/2)
64mm
(2-1/2)
38mm
(1-1/2)
108mm
(4-1/4)
349mm
(13-3/4)
11mm (7/16) DIA.
ANCHOR SCREW
HOLES
C/L
286mm
(11-1/4)
235mm
(9-1/4)
*
*
76mm
(3)
8mm x 27mm
(5/16 x 1-1/16) SLOTS
S-9 HANGER
*
787mm (31)
864mm (34)
419 mm
(16-1/2)
54mm (2-1/8) DIA.
HOLES FOR
CONCEALED ARMS
BARRIER FREE