American DJ QUATRO II Indoor Furnishings User Manual


 
American DJ
®
LOS ANGELES, CA. 90058
Model: Quatro II ™
SPECIFICATIONS:
Lamp: 4 x 12V 50W ZB-EXN
Power: 110V/60Hz
Colors: Red, Blue, Green, &
Yellow
Optics: High Quality Glass
Lens
Ventilation: Convection
Working Position: Any
Weight: 6lbs.
Size:15 1/2” x 7 1/2 “ x 5 3/4”
Choose from our list of
optional gobo patterns to
give the look you want!
HALOGEN LAMP WARNING!
This fixture is fitted with halogen lamps
which are highly susceptible to damage if
improperly handled. Never touch lamp
with bare fingers as the oil from your
hands will shorten lamp life. Also, never
move fixture until lamp has had ample
time to cool. Remember, lamps are not
covered under warranty conditions.
Thank you for purchasing this
American DJ® product. For your
convenience this lighting eff e c t
has been lamped and is ready to
be used, there is no assembly
required. Please read the follow-
ing instructions before installing
or using your new unit.
Operating Instructions:
The Quatro II™ is a gobo-spot chase
projector, and is sound active. Lights will
react to the beat of the music. It has an
adjustment knob to adjusts sound activation
sensitivity, Sold with 4 standard gobos.
To focus the image; loosen the nob on the
lens case and pull the lens tube until the
image is in focus on the surface it is being
projected on.
To replace lamps or gobos; remove the
two small screws holding the face plate and
remove the face. Change the gobo if desired
or remove the support ring that holds down
the lamp. Remove and replace lamp and
reassemble unit.
For service, contact your American DJ™
dealer.
C a u t i o n ! Always disconnect from main
power before replacing lamps or servicing unit.
Remember to always replace with same lamps
and fuses.
American DJ
®
User Instructions
QUATRO II™