Filter
Top Products
Service & installation manual _8
ACCESSORIES
27
33
26
28-1
28-3
28-2
35
29
35
31
22
24
23
30
Drain hose
Air exhaust
Air intake
Horizontal window installation
Vertical window installation
A
B
B
A
A
B
A: Air exhaust - Warm
B: Air intake
1. Slide the outside window flanges through the holes in the window panel. Then, from the inside, place the rubber
gaskets on the ends of the flanges, snugly against the window panel. Then, screw the lock rings onto the corresponding
flanges, as shown on the illustration.
2. There is a small black hose for water drainage inside the air exhaust hose. The black hose must be passed through the
window flange to drain the water outside.
The flange with flaps is designed to connect to the exhaust hose. The other flange (with fixed louvers) is designed to
connect to the air-intake hose. If the adapter is installed vertically, the flange for the exhaust hose must be placed above
the flange for the air-intake hose. This will prevent the air-intake hose from absorbing the hot and humid air expelled
through the exhaust hose.