Air Oasis Induct 9 Air Cleaner User Manual


  Open as PDF
of 6
 
2
Step 4
Plug the power cord into an electrical outlet. You may optionally have an
electrician wire the air purier to your HVAC unit so that the air purier only
operates when your HVAC fan is running. Once the unit is plugged in the
indicator light should glow to indicate the AHPCO Cell is working properly.
5
AHPCO™ Cell Replacement
Step 1
CAUTION: Before attempting to service the Air Oasis unit, be sure the
power is off and unplugged.
Remove three (3) screws at the top of
the aluminum face plate. Then slide
the face plate up and off.
Step 2
Unplug the four pin lamp connec-
tors and ber optic cords from the
AHPCO Cell.
Read all instructions carefully before operating
your air purier.
Table of Contents
Safety Instructions and Cautions 1
Table of Contents 2
Warranty 3
Maintenance and Customer Service 4
Placement and Operation 4
Cleaning 4
AHPCO™ Cell Replacement 5-6
Troubleshooting Guide 7
 previous