Dual Induct
(120v)
Owner’s
Manual
This Manual Includes:
• Warranty
• Safety Warnings
• Installation Instructions
• Operating Instructions
• Replacement Directions
• Troubleshooting Tips
Before operating this unit or replacing the AHPCO™
Cell carefully read the contents of this manual.
Troubleshooting Guide
Problem Reason Solution
Unit does not turn on. 1. Power Cord
2. AHPCO™ Cell
3. Indicator Light Not
Working
1. Check to make sure
power cord is plugged
in or properly connect-
ed to HVAC unit.
2. Check to make
sure UV lamp within
AHPCO™ Cell in
plugged in completely.
3. Make sure exposed
end of black ber optic
cord is exposed to the
UV light.
3401 Airway Blvd
Amarillo, TX 79118
Toll-Free: 1-800-936-1764 Fax: 1-806-373-7799
www.AirOasis.com
Copyright© 2006 Air Oasis All Rights Reserved