Aiphone AP-M Home Security System User Manual


 
- INSTRUCTIONS -
The LS-NVP is a vandal proof sub station designed for use with the systems listed above. The LS-NVP-
W is the weather resistant model. Both are constructed of 11 gauge carbon steel with a white powder-
coated finish. The LS-NVP(-W) can be flush or surface mounted with the SBX-NVP. Each unit includes
tamper proof screws and tool for installation.
LS-NVP (-W)
Vandal Proof Sub Station for LAF-C, LEF, LEM, AP-M, MP-S Systems
SBX-NVP
Surface Mount Box for LS-NVP
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
TOLL FREE TECHNICAL SUPPORT:
(800) 692-0200
TOLL FREE FAX LINE:
(800) 832-3765
E-MAIL: tech-serv@aiphone.com
LS-NVP Instr
0698bkjd
SPECIFICATIONS:
Power Source: Supplied by master station
Speaker: 20 ohms, 3" diameter, water proof and puncture resistant, 2.5 oz. ceramic magnet
Call Button: Single pole, single throw (SPST), normally open (N/O)
Faceplate: 11 gauge carbon steel with powder-coated white baked epoxy finish
Communication: Hands free at sub. Master is push-to-talk,release-to-listen
Mounting Hardware: Tamper proof screws
Terminations: Color-coded prewired pigtails
Wiring: RED to # terminal, BLK to "E" (Common) terminal, GRN to "-" terminal
Shielded cable is recommended.
Use Aiphone #822202 or #821802 for homerun wiring, #822206 for up to 4 stations
on each run, or #822210 for up to 8 stations on each run.
Wiring Distance: 650' with 22AWG; 1,600' with 18AWG.
Dimensions (H x W x D): LS-NVP alone: 7-1/2" x 5-1/2" x 2". With SBX-NVP: 8-5/8" x 6-5/8" x 2-1/4"
+
-
WIRING DIAGRAM:
1
2
~
10
E
+
-
Red
Blk*
Grn
Red
Blk*
Grn
LAF-C or LEF
Master
LS-NVP
LS-NVP
PS-12C
Switch on PC board:
Leave in the LOWER
position (set from factory),
for use with LEM, LAF-C and
LEF systems
* In single master system, 2
conductors homerun can be
used with the BLK and GRN
wires tied together and "E"
and "-" jumpered at the
master.
WIRING DIAGRAM:
1
E
~
10
E
AP-M or MP-S
Master
Switch on PC board:
Move to the UPPER position
for use with AP-M or MP-S
systems.
Tie Blk and Grn wires
together for all installations
with the MP-S and AP-M
systems.
Red
Blk
Grn
LS-NVP
Special
Order
Products
Red
Blk
Grn
LS-NVP