ADT Security Services 3000 Home Security System User Manual


 
– 32 –
$FFHVVLQJ2WKHU3DUWLWLRQV
&RQWLQXHG
&RPPRQ=RQH2SHUDWLRQ
Ask your installer if a
"common zone" was
assigned. If so, check
this box
Your system may have been set up to use a common zone, which is
an area shared by users of both partitions, such as a foyer or lobby.
If so, please note the following:
The common zone will sound and report alarms only when
both
partitions are armed. If only one partition is armed, the system
ignores faults on the common zone.
Either partition may arm its system if the common zone is
faulted, but once armed, the other partition
will not
be able to
arm unless the common zone is first bypassed or the fault is
corrected.
Faults on the common zone are displayed on common zone
touchpads, and will also appear on another partition’s touchpad
when that partition is armed.
Either partition can clear and restore the common zone after an
alarm.
Entry/exit time for the common zone is the same as for partition 1.