Filter
Top Products
– 31 –
$FFHVVLQJ2WKHU3DUWLWLRQV
&RQWLQXHG
8VLQJWKH*R7R&RPPDQG
If the user is authorized, a touchpad in one partition can be used to perform system
functions in the other partition by using the GOTO command.
•
You must use a Custom English touchpad to access another partition.
•
Touchpads automatically return to their original partition after 2 minutes
with no touchpad activity.
1.
+ [
∗
] + partition number (0,1,2,3)
(Security Code)
0 = return to touchpad’s original partition.
1 = partition 1; 2 = partition 2; 3 = common zone
The touchpad beeps to confirm the partition change.
English Display:
READY
2.
The touchpad remains in the new partition until
directed to go to another partition, or until it
automatically returns to the original partition.
The active partition number is displayed in the upper
left portion of screen, if the option is programmed.
English Display:
READY
0XOWL3DUWLWLRQ$UPLQJ
Some users can be given Multi-Partition arming ability by being assigned to both
partitions when programming user attributes.
When attempting to arm multi-partitions:
•
You must use a Custom English touchpad.
•
The system arms only if all partitions are “ready to arm.”
•
If any partition is “not ready,” the system does not arm at all.
•
You can use the GOTO command to bypass open zones before arming.
•
If any partition is already armed when global arming is attempted, that
partition remains in its existing armed state.
+ [0] + arm command (see list below)
(Security Code)
Multi-Partition Arming Commands
2 = arms all partitions AWAY
3 = arms all partitions STAY
33 = arms all partitions NIGHT-STAY
7 = arms all partitions INSTANT
1 = disarms all partitions
English Display:
READY