Filter
Top Products
Using Advanced Functions
17
[2]
AC Power
Trouble
Electrical power to the system has been interrupted. Check your
fuse box or circuit breaker to ensure that the electricial supply for
the system is on. If this does not correct the problem, call for ser-
vice.
[3]
Phone line
Trouble
Your system has detected a problem with the telephone line. If
this problem does not correct itself, or happens frequently, call for
service.
[4]
Communication
Trouble
Your system has been unsuccessful in communicating an event to
your central station. If you get this Trouble, call for service imme-
diately.
[5]
Zone Fault
Press [5]
Your system has detected a fault on one or more zones (detectors).
Press , and the system will display which zones have a fault. If you
are unsure of how to clear a zone fault, call for service.
[6]
Zone tamper
Press [6]
Your system has detected a tamper on one or more zones (detec-
tors). Press and the system will display which zone(s) have
tampers. If you are unsure how to clear the zone tamper, call for
service.
[7]
Device low
battery
Press [7]
Your system has detected that one or more of the wireless detec-
tors on the system has a low battery. Press , and the system
will display which devices have a low battery. Change the relevant
batteries. See page 24 for instructions. If this does not correct the
problem, call for service.
[8]
The time and date
are incorrect
If all power to the system is interrupted (AC and battery), the sys-
tem clock and date will need to be reset. See
Setting the Time
and Date
on page 20. If you are unsure of the cause of the sys-
tem power failure, call for service.
Display: Problem and how it should be addressed:
5
6
7