• 
  AQ 6000 energy manager
  
  
  I have two unused sets but only one set of sensors - will split if required.
  
  I will be posting on EBAY shortly but contact me if you wish
  
  
  Was this comment useful?


• AQ6000 problem
  
  
  My outside sensor is registering -30degC all the time! The sensor itself checks out OK, I think I have a fault on the main circuit board in the control box. Any spare main control boxes around?
  
  
  Was this comment useful?


• AQ6000 thermostat
  
  
  Do you still have a spare thermostat/controller as the LCD display on mine has packed up?
  
  Thanks in advance
  
  
  Was this comment useful?


• RE: REPLACEMENT
  
  
  does anyone know how to use the aq6000 to just heat water without radiators? thanks
  
  
  Was this comment useful?


• AQ6000 outside sensor
  
  
  Now found it IS my outside sensor at fault, but having great difficulty sourcing a replacement locally.
  Clevedonkeith - do you still have one for sale?
  Pt No. is T7043D
  Not bothered about the housing, all I need is the little circuit board from inside.
  email: rgtay@tiscali.co.uk
  
  
  Was this comment useful?


• To Adrian - AQ6000 water only
  
  
  Set all 3 levels of room temperature to something low, say 10degC, then go to the rectanglar black control box, probably mounted in the airing cupboard next to your hot water tank. Remove the cover (1 screw) and inside you'll find the temperature regulator for hot water - just set it to the temperature you need, usually around 50deg C?
  
  
  Was this comment useful?


• AQ6000 Ext Sensor
  
  
  Regret no ext sensor - only the housing however, I do have an immersion sensor that might be compatible. It is rated at 1000ohms @25 deg C - 800 ohms @0 deg C. Clevedonkeith@aol.co.uk
  
  
  Was this comment useful?


• AQ6000 ext sensor
  
  
  Kieth - thanks for that, private email sent.
  
  Richard
  
  
  Was this comment useful?


• AQ6000 Manuals
  
  
  For anyone who needs them, I have both the full system installers manual (A4 format) and also the householder's room unit programming guide. I could scan these as .PDFs and send via email, jus reply here with you private email address - -
  Richard.
  
  
  Was this comment useful?


• Honeywell AQ6000 wanted
  
  
  Honeywell AQ6000, black box controller, and wall setting time clock wanted.
  
  Please contact with details.
  
  email: alockwood1 (at) toucansurf.com
  tel: 07909 587902
  
  
  Was this comment useful?


• To Richard AQ6000 Manuals
  
  
  Would love a copy of the blackbox manual. Have just moved to a house with this system. I have the thermostat instructions but not the other. The hot water system only seems to work with the heating on.
  tom@mcdonoughmail.co.uk
  
  
  Was this comment useful?

Add Comment