• RE: waher help
  
  
  the error code is for a failure to drain properly. Which will also give you the "suds" message. It is usually a problem with the washers filter. By opening the bottom panel (three screws 9/32 socket) the panel comes off and you will see a usually white circular filter. I suggest having a small pail or pot to catch water, even if you think it is empty chances are it is not. Turn counterclockwise and it will come off. This filter is a platic part that basically catches larger objects, quarters, pennies, socks, nails, screws (yes nails and screws were in mine). Clean rinse off and place back and problem solved.
  
  
  Was this comment useful?


• kenmore he4t washer
  
  
  i am about to buy one off craigs list . Does this washer have any special drain restrictions . Does it have a pump to pump the water into a standpipe or is it gravity drain . Does it have to be bolted to the floor. Please let me know. Thanks
  
  
  Was this comment useful?

Add Comment