Enter Manufacturer Name and Model Number
RSS What is this?

Kenmore Vacuum Cleaner Manuals

Choose from our list of products below:
# A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
  • #
  • 11623613300 - Kenmore 11623613300 Vacuum Cleaner
  • 2029914 - Kenmore 2029914 Vacuum Cleaner
  • 24195 - Kenmore 24195 Vacuum Cleaner
  • 25614 25615 - Kenmore 25614 25615 Vacuum Cleaner
  • 26082 - Kenmore 26082 Vacuum Cleaner
  • 27515 - Kenmore 27515 Vacuum Cleaner
  • 28015 - Kenmore 28015 Vacuum Cleaner
  • 37010 - Kenmore 37010 Vacuum Cleaner
  • 3702 - Kenmore 3702 Vacuum Cleaner
  • 37030 - Kenmore 37030 Vacuum Cleaner
  • 3704 - Kenmore 3704 Vacuum Cleaner
  • 37105 - Kenmore 37105 Vacuum Cleaner
  • 37115 - Kenmore 37115 Vacuum Cleaner
  • C
  • CF-4 - Kenmore CF-4 Vacuum Cleaner

Don't See the Model Number Listed?
 Ask the membership for help locating your missing manual.

Member Discussion on Kenmore Vacuum Cleaner

Please help find the manual for this Kenmore Canister Bag Vacuum Cleaner

need manual for power head, belt broken and cannot open, no screws apparant

Add a comment   |  I have this manual   |  Notify me when the manual is found

Comments

  • Kenmore Vacuum 11656500991CReplacing power head belt

    1)Remove light cover by pressing in & lifting both sides.
    2)Push in & turn bulb counterclockwise to remove.
    3)Unscrew the cover screws.
    4)Turn the powerhead over. To remove cover, insert screwdriver at cover tabs on both sides & twist to release tabs.
    5)Turn the powerhead right side up. Press handle release pedal & lower the swivel. Tilt cover forward from back until front snaps free.
    6)Carefully insert & twist screwdriver at each brush support to free brush from base.
    7)Remove worn belt.
    8)Install new belt over motor drive, then over brush sprocket.
    9)Put it back together.

    Was this comment useful?

  • Kenmore Vacuum 11656500991CReplacing power head belt

    1)Remove light cover by pressing in & lifting both sides.
    2)Push in & turn bulb counterclockwise to remove.
    3)Unscrew the cover screws.
    4)Turn the powerhead over. To remove cover, insert screwdriver at cover tabs on both sides & twist to release tabs.
    5)Turn the powerhead right side up. Press handle release pedal & lower the swivel. Tilt cover forward from back until front snaps free.
    6)Carefully insert & twist screwdriver at each brush support to free brush from base.
    7)Remove worn belt.
    8)Install new belt over motor drive, then over brush sprocket.
    9)Put it back together.

    Was this comment useful?


Add Comment


(optional)
If you have a helpful URL, add it here.
Product Picture:
(optional)

Supported file types: .jpg, .gif, .png
 
Join Upromise for Free
Upromise.com Turn your everyday spending into college savings.

Recent Articles



Recent User Activity



About OwnerIQ | Advertise | Manufacturers | Terms and Conditions | Privacy Policy