Help Requests

White Rodgers Thermostat 1F86-344

Get This Manual


Can You Help With These Problems?

  • Posted by tmckenzi on Mar 21st, 2014 at 9:09am

    how do you remove the batteries from the thermosta
    how do you remove the batteries from the thermostat already on the wall I can see where it comes a part do you have to take the whole thing off?
  • Posted by jcampbel on Mar 2nd, 2014 at 11:06am

    There is a flame showing on my thermostat. Could t
    There is a flame showing on my thermostat. Could this just be a dirty filter?
  • Posted by jesslogan.jc on Mar 1st, 2014 at 10:23am

    White Rodgers Model 1F86-344. How do I change the
    White Rodgers Model 1F86-344. How do I change the battery?
  • Posted by 6nations34 on Feb 23rd, 2014 at 8:11am

    The room tempeture is85 system is on cool I pres
    The room tempeture is85 system is on cool I press the down arrow to 72 . The tempeture well not go down
  • Posted by nannaz3 on Feb 12th, 2014 at 12:59pm

    Will not shut off furnace when set temp is reached
    Will not shut off furnace when set temp is reached. Cannot raise or lower temp
  • Posted by johnniehardy2000 on Jan 28th, 2014 at 6:25am

    How do I change the battery
    How do I change the battery
  • Posted by j.cipriani on Jan 24th, 2014 at 5:07am

    How to change battery
    How to change battery
  • Posted by toma3510 on Jan 6th, 2014 at 7:43pm

    need help with wire code on 1f86-344,how to wire i
    need help with wire code on 1f86-344,how to wire it.
  • Posted by gsteinborn on Dec 31st, 2013 at 3:17pm

    furnace needs to be kickstarted sometimes
    furnace needs to be kickstarted sometimes
  • Posted by msandi18765 on Dec 23rd, 2013 at 10:35am

    Need to change the batteries. How do I remove the
    Need to change the batteries. How do I remove the thermostat from the wall?
  • Posted by penquinlady1 on Dec 16th, 2013 at 1:12pm

    How do you change the batteries in the1F86-344?
    How do you change the batteries in the1F86-344?
  • Posted by dawahsum on Dec 10th, 2013 at 7:14pm

    My heat is dropping well below my setting. I repla
    My heat is dropping well below my setting. I replaced batteries and it worked a little bit, but then strarts to drop well below again. I turned it off and back on and this kicks the heater on for a short while but then turns off before getting anywhere close to the setting..
  • Posted by barbgeorge05 on Dec 4th, 2013 at 7:36pm

    i have model 1f86-344 it says low battery . Where
    i have model 1f86-344 it says low battery . Where do i put them in???
  • Posted by merlin.2 on Nov 21st, 2013 at 9:20am

    Trying to access configuration menu. System switch
    Trying to access configuration menu. System switch is in off, both temp keys pushed at same time gives display of HO 68 (68 is room temp). Can not scroll through menu with temp buttons, will only chnge the room temp #.

    Only want to change *f to *c
  • Posted by jcraig1031 on Oct 29th, 2013 at 7:49pm

    I can't get the desired temp to go higher than 72
    I can't get the desired temp to go higher than 72 degrees
  • Posted by on Oct 24th, 2013 at 10:04am

    It is installed already, How can I tell if it is
    It is installed already, How can I tell if it is hard wired or battery operated? 1F86-344, White Rodgers
  • Posted by on Oct 10th, 2013 at 10:57am

    I replaced the batteries a week ago and now thermo
    I replaced the batteries a week ago and now thermo is showing low batteries again ...
  • Posted by on Oct 9th, 2013 at 6:50pm

    forgot to mention I replaced batteries as well. Ev
    forgot to mention I replaced batteries as well. Everything else seems to work well, fan just won't shut off. Is this a filter issue or changed battery issue. Not much of a manual, BTW.
  • Posted by on Oct 9th, 2013 at 6:45pm

    Replaced filter and now fan runs all the time whet
    Replaced filter and now fan runs all the time whether system on or not, set for automatic or not. Is this a programmable issue?
  • Posted by on Oct 9th, 2013 at 9:01am

    how to reset the filter message
    how to reset the filter message
  • Posted by on Sep 23rd, 2013 at 8:39am

    how to open control box to change batteries?
    how to open control box to change batteries?
  • Posted by on Sep 21st, 2013 at 2:57am

    I wanted to change the setup temprature, but up do
    I wanted to change the setup temprature, but up down buttons do not make any change in display. How to programe it?
  • Posted by cindymyers5030 on Aug 28th, 2013 at 12:34pm

    I have just installed this thermo & installed new
    I have just installed this thermo & installed new batteries, but the display isnt showing.
  • Posted by cindymyers5030 on Aug 28th, 2013 at 12:29pm

    I have just installed this thermo & installed new
    I have just installed this thermo & installed new batteries, but the display isnt showing.
  • Posted by copgirl746 on Aug 11th, 2013 at 3:15pm

    display
    It keeps showing filter battery..... and when i raise or lower temp it goes blank and says filter battery
  • Posted by jimcurryrph on Aug 8th, 2013 at 11:50am

    How to change the battery
    How to change the battery
  • Posted by richardnazario on Jun 3rd, 2013 at 5:16pm

    display
    not displaying room temp. properly
  • Posted by Bryanne Soblessed Rodgers on May 29th, 2013 at 6:08pm

    How do u know when the air is on? Not sure how 2 t
    How do u know when the air is on? Not sure how 2 turn the air on.
  • Posted by mattiejennings62 on May 4th, 2013 at 11:58am

    how to change the battery
    how to change the battery
  • Posted by saffie11 on Apr 5th, 2013 at 3:43am

    asteric appearing on thermostat
    asteric appearing on thermostat
  • Posted by awalton50 on Feb 24th, 2013 at 12:59pm

    signaling low battery
    signaling low battery
  • Posted by kirksey417 on Feb 24th, 2013 at 10:42am

    Display indicates low battery. How do you remove c
    Display indicates low battery. How do you remove cover to replace battery?
  • Posted by robtbock on Feb 20th, 2013 at 2:41pm

    display no longer illuminated
    display no longer illuminated
  • Posted by mr.stanford1971 on Jan 2nd, 2013 at 1:24pm

    what does the flame symbol mean on the thermostat
    what does the flame symbol mean on the thermostat
  • Posted by bcurf on Dec 9th, 2012 at 11:23pm

    Why is my thermo Rodgers not working is not heatin
    Why is my thermo Rodgers not working is not heating up
  • Posted by lindajt3 on Nov 4th, 2012 at 9:44pm

    I am using this themostat with a baseboard electri
    I am using this themostat with a baseboard electric heater. The heat comes on without regards to the temp settings. Any ideas?
  • Posted by kimelas on Oct 29th, 2012 at 8:00am

    Mine says lo battery. How do you change the batte
    Mine says lo battery. How do you change the battery?
  • Posted by hearsay111 on Oct 21st, 2012 at 11:48am

    The manual says nothing about whether the Fan can
    The manual says nothing about whether the Fan can be manually set to Off when the AC/Heat is set to off.
  • Posted by hearsay111 on Oct 21st, 2012 at 11:46am

    why my blower comes when everything is turmed off
    why my blower comes when everything is turmed off
  • Posted by alfordebundy on Oct 19th, 2012 at 8:25pm

    where are the batteries located
    where are the batteries located
  • Posted by camaron on Sep 26th, 2012 at 8:14am

    my boiler was working i changed batteries in the t
    my boiler was working i changed batteries in the thermastat with new ones now the boiler will not fire up, i reinstaled the old betteries and the boiler steel won`t fire up.
  • Posted by jmeth238 on Jul 14th, 2012 at 3:30pm

    The fan, (set at Auto rather than On position) run
    The fan, (set at Auto rather than On position) runs intermittently and arbitrarily even when the AC/Heat button is turned to Off position. Is there any way to turn the Fan off completely?
  • Posted by Kevin Wedlake on Jun 28th, 2012 at 4:07pm

    I have a white rogers system model # 1f 86-344 the
    I have a white rogers system model # 1f 86-344 the filter display is showing, could you please tell me how to change or clean the filter.
  • Posted by rangel1972 on Jun 16th, 2012 at 6:50pm

    I have model if86-344 the heater works so does fan
    I have model if86-344 the heater works so does fan but when ac turns on it blows outside air its constantly hot in my apartment help
  • Posted by changpeiliang346 on Jun 10th, 2012 at 11:31pm

    Change the battery and the digital reading of the
    Change the battery and the digital reading of the actural house temperature is not right
  • Posted by craigslist.cla on May 27th, 2012 at 12:11pm

    Screen went blank, To reset it said to push both a
    Screen went blank, To reset it said to push both arrows & click to heat at the same time,It then came on but when right back out, then did it like 3 more times then nothing..



    It said something about filter battery and it had a snowflake on the screen when it did come on so not sure what that me…
  • Posted by Jason Shiflett on May 24th, 2012 at 9:24pm

    I'm having trouble installing my thermostat. The
    I'm having trouble installing my thermostat. The manual has wiring diagrams for 5 wires, but I have 6 and I no matter what I try, I can't get it to do anything.
  • Posted by chamberlin704 on May 24th, 2012 at 2:25pm

    Our thermostat does not seem to maintain the set t
    Our thermostat does not seem to maintain the set temperature our house is three to four degrees warmer than the temperature we set the thermostat for. Is there any adjustment in the thermostat to correct this?
  • Posted by vanpatb on May 23rd, 2012 at 9:15pm

    What does the star in the display mean?
    What does the star in the display mean?
  • Posted by mr.price on Mar 15th, 2012 at 9:20pm

    Why does the word Filter and a * show up in displa
    Why does the word Filter and a * show up in display on

    White Rodgers thermostats 1F86-344?
  • Posted by Paul Stonkus on Feb 15th, 2012 at 7:05pm

    I have a 1F86-244 and it displays LO BATTERY. I r
    I have a 1F86-244 and it displays LO BATTERY. I replaced the batteries, waiting five minutes between removal of old and installation of new and it still displays LO BATTERY. Nothing seems to be able to make it change. Is there a way to possibly reset the thermostat?
  • Posted by lynndo on Feb 14th, 2012 at 11:07am

    settings
    when termostat is set at 68 the furnace somes on at 68 and goes off at 70 how do i fix so furnace comes on at 67 and goes off at 69 when set at 68 thanks
  • Posted by connie.crain on Feb 5th, 2012 at 11:45am

    I have Type No. IF86-244 thermostat. The readings
    I have Type No. IF86-244 thermostat. The readings became illegible so I took off the cover and saw batteries. Replaced batteries and LED now reads "Low Battery" but still no temps are shown. Heater now will not turn off unless I switch off system completely. What do I need to do? C. Crain
  • Posted by rawar2 on Jan 13th, 2012 at 12:14pm

    fan will not run in manual mode
    fan will not run in manual mode
  • Posted by dwooten001 on Dec 12th, 2011 at 9:57pm

    The furnace motor comes on and goes off every 12-1
    The furnace motor comes on and goes off every 12-15 seconds when temp reaches the set temperature.
  • Posted by cthcth40 on Oct 26th, 2011 at 7:11am

    What does it mean when there is a picture of a fla
    What does it mean when there is a picture of a flame showing?
  • Posted by brooks1221 on Oct 25th, 2011 at 9:17am

    I just replaced the 3 AA batteries in my thermosta
    I just replaced the 3 AA batteries in my thermostat. why does the word "BATTERY" still show in the lower left on the display screen? thank you.
  • Posted by y1944 on Sep 29th, 2011 at 4:33pm

    I have a model 1F86-344. It has no display on the
    I have a model 1F86-344. It has no display on the screen. I changed the batt's, still no display. The blower fan will come on. But the Heat / cool switch has no effect. I can push the relay in on the compressor and it will run. No tripped breaker and fuses are good. Any suggestions?
  • Posted by sk4t3rassassin on Sep 29th, 2011 at 10:17am

    how to keep thermostat from being set below a cert
    how to keep thermostat from being set below a certain temperture?
  • Posted by pretlor5 on Aug 30th, 2011 at 9:27pm

    My thermostat is stuck can't adjust the temperatur
    My thermostat is stuck can't adjust the temperature I changed the batteries still nothing.i can't get the air to come on
  • Posted by missreddone23 on Aug 18th, 2011 at 9:26pm

    my thermostat is says 98f and the temp is 71
    my thermostat is says 98f and the temp is 71
  • Posted by galen72 on Jul 17th, 2011 at 8:55pm

    My air is running non-stop. The thermostat is less
    My air is running non-stop. The thermostat is less than 1 year old
  • Posted by crodgmcss on Jul 5th, 2011 at 11:02am

    how to change battery?
    how to change battery?
  • Posted by smithbkd on Jun 21st, 2011 at 7:56pm

    Hello. I have an 1F86-244 thermostat. Just repla
    Hello. I have an 1F86-244 thermostat. Just replaced the batteries. Now the temperature controls don't work, however, the L E D indicator is working, as is the manual fan. Does something need to be reset?
  • Posted by mqalways1 on Jun 20th, 2011 at 3:38pm

    how can i change the Fahrenheit temperature
    how can i change the Fahrenheit temperature
  • Posted by msthomas6325 on Mar 10th, 2011 at 3:26pm

    1F86-344 thermostate
    I changed batteries and now the temp. is not working. Can I get a manuel for the unit. (White Rodger 1F86-344
  • Posted by barsntone on Mar 10th, 2011 at 10:16am

    inhouse temp reading too high for IF86-344
    seems as if the in house temp reading is innaccurate...too high. is there a reset? advice for repair please
  • Posted by donaldababe on Feb 8th, 2011 at 8:14pm

    problem
    I can't get the temperature number to come up
  • Posted by aparham1 on Dec 19th, 2010 at 6:38pm

    No heat
    No heat from Thermostat. Furnace is fine. Batteries changed and filter replaced. Has not worked today and it is cold here in GA.
  • Posted by spencerzoey on Dec 9th, 2010 at 5:51pm

    "filter" indicater
    "filter" indicater showed on thermostat, I changed the filers and the "filter" indicater still shows on thermostat, what should I do?
  • Posted by latrendajhnsn on Nov 27th, 2010 at 12:36pm

    No Heat
    Turned on the heat early in the evening and it worked just fine. Turned the heat to turn off during the night and early in the morning it still want come back on regardless of what temperature it is set on.
  • Posted by sytap on Nov 12th, 2010 at 12:16pm

    white rogers 1f86-344 ftat
    worked fine on a/c, tried heat today, nothing. jumpered red to wire instide stat andheating systeme came on.
  • Posted by helenleong32 on Oct 22nd, 2010 at 9:54am

    no heat
    I set the temp at 65. The heat does not come on. I do hear the click sound.
  • Posted by m.longpre on Sep 17th, 2010 at 10:08am

    thermostat if86-344
    to get a temp of 23C i must set thermostat to 26. it goes to 26 and i do not need that. help
  • Posted by kmat on Aug 9th, 2010 at 4:28pm

    1f86-344, cool down arrow problem?
    1f86-344, cool down arrow problem? The down arrow does not work. I try to bring down the temperature from 84 to 76 and it's stuck on 84.
  • Posted by jlmm812 on Jul 31st, 2010 at 2:43pm

    Filter icon
    I changed the filter but the word FILTER is still showing. What should I do?
  • Posted by rathsbones on Jul 10th, 2010 at 10:16am

    Thermostat not turning a/c off
    My model 1F86-344 is two years old. If I set the house temp to 74 it will run the a/c continuously even after the temp shows the desired setpoint on the digital display. I can only turn off the a/c by manually raising the thermostat to 75 degrees. It has worked perfectly for two years but started…
  • Posted by mikeglewis on Jul 5th, 2010 at 11:09am

    1F86-244
    Actual temp is dispayed but set point isn't. Changed the two battreies and tried resetting by holding up and down arrows plus switching from OFF to HEAT. Still can't get it to switch on to Cool
  • Posted by zetl on May 30th, 2010 at 10:45pm

    outside condenser fan does not stay on
    model 1f86-344 white-rodgers
  • Posted by zetl on May 30th, 2010 at 10:45pm

    outside condenser fan does not stay on
    model 1f86-344 white-rodgers
  • Posted by on Jan 30th, 2010 at 8:40am

    the highes safe...
    ...settings????
  • Posted by bill5245 on Jan 17th, 2010 at 10:42am

    white rodgers 1f86-344
    my thermostat wire has red white yellow green thermostat has rc b rh w c g o y
  • Posted by jeanenelcampbell on Sep 13th, 2009 at 9:08am

    Display not Working
    The display is not working or letting me change the temperature. I have changed the batteries (several times) and everything looks connected. My A./C is running constantly and is very cold! It is turning the until off and on...but it must be set at 50! It's freezing in here!
  • Posted by dsj1956 on Aug 22nd, 2009 at 11:07am

    Connecting wires
    I am replacing a Honeywell mercury thermostat with a White Rodgers digital. I ahve connected the green to green yellow to yellow and black to w ports. There is a jumper wir from RH to RC. What port do you hook the red wire to. My furnace will light but the blower will not work at all. The AC will no…
  • Posted by gmoylan on Feb 24th, 2009 at 9:59am

    DEHUMIDSTAT
    HOW DO I CONNECT A HONEYWELL H46C1166 DEHUMIDSTAT TO MY WHITE RODGERS TERRMOSTST 1F86-344?
  • Posted by bumkin_78 on Jan 25th, 2009 at 12:25pm

    Heat is not truning on
    Yes I have problem wth my heat trying to turn on at times i dont know if its how the thermostat is set or if its the main thing for the house or anything but it can be set at 75 degrees farenheit and not turn on and it shows that the temp. in the house is 71 degrees farenhiet.
  • Posted by jburger7729 on Dec 19th, 2008 at 12:19pm

    Difference
    I have a 1F86-244 but can not find any information on this site. Is there significant differences between the 244 and 344?

Ask OwnerIQ Members for Help With A Problem

Let the ManualsOnline Membership help you! Tell us about the problem you're having with this product. Your request will be posted for the ManualsOnline membership to view. You will be notified of responses by email. Required fields are in BOLD.

Product Picture:
(optional)

Supported file types: .jpg, .gif, .png
 
  


Menu

Recent User Activity


TRUSTe Seal


  • Facebook
  • Twitter
  • ManualsOnline Blog
  • ManualsOnline Google Plus