Help Requests

Nordyne Furnace M1M

Get This Manual


Can You Help With These Problems?

  • Posted by jasonschisel on Mar 25th, 2014 at 8:38am

    5 flashes of red light
    Red light flashes indicating L1 voltage problem
  • Posted by on Mar 15th, 2014 at 10:54am

    No heat the fan is running no matter thermostat of
    No heat the fan is running no matter thermostat off or on. changed the thermostat but still same problem the red flash light is flashing normally.what should I do
  • Posted by donaldwalter2 on Jan 29th, 2014 at 3:46pm

    no heat
    as soon as I turn on the thermostat the main blower comes on and runs non stop but no heat. the control module is flashing rapidly. replaced circuit board and igniter/flame sensor still have the same problem.
  • Posted by ehollenbeck13827 on Jan 3rd, 2014 at 11:31am

    poping noise
    Popping noise after furnace finished its cycle. My carbon monoxide detector never goes off, so I know its not the cracked box issue. What could it be? fixable, or new furnace?
  • Posted by speedone98 on Dec 13th, 2013 at 12:38pm

    Flame present but still cold
    Company came out, replaced gas valve, and it now stays lit, but is still cold air coming out. What next?
  • Posted by brucelsevier on Nov 26th, 2013 at 3:12pm

    I have the same problem and question: I have a fl
    I have the same problem and question:

    I have a flashing red LED light 2 times. On the cover it says pressure switch is open. My furnace won't kick on. How do I solve this?
  • Posted by lisam1016 on Nov 25th, 2013 at 4:24pm

    furnace would not work jumped the pressure switch
    furnace would not work jumped the pressure switch and it works now. Do I need to replace the pressure switch?
  • Posted by jakerjenkins on Nov 19th, 2013 at 9:54pm

    i have a nordyne furnace model # m1mb070aaw and wh
    i have a nordyne furnace model # m1mb070aaw and when it trys to start up the fan kicks in and it shuts off the flame wont stay lit code says low fuel and ignition lockout
  • Posted by blue_loney_lake on Nov 11th, 2013 at 4:00pm

    how do you replace gas valve
    how do you replace gas valve
  • Posted by davisgroup4brown on Oct 29th, 2013 at 6:13pm

    How to reset a propane burner. I need to reset do
    How to reset a propane burner. I need to reset do I just cut the power and wait
  • Posted by on Oct 23rd, 2013 at 7:44am

    open pressure switch - how to reset or close
    open pressure switch - how to reset or close
  • Posted by on Oct 19th, 2013 at 9:07am

    yellow light won't stay lite
    yellow light won't stay lite
  • Posted by on Oct 3rd, 2013 at 4:11am

    noise
    furnace very loud when running on heat cycle....any suggestions...would base be problem
  • Posted by davehay1 on May 9th, 2013 at 11:04am

    looking for a service manual a gibson furnace, i u
    looking for a service manual a gibson furnace, i understand that nordyne still uses the name.....
  • Posted by wmitch4 on Apr 19th, 2013 at 9:38am

    Hi, The existing blower motor is way too loud!!!!
    Hi,

    The existing blower motor is way too loud!!!!! Uses too much enrgy!!

    Is there a varible Speed DC motor for the model M1MB-056 A-BW

    TX

    MITCH
  • Posted by patrick.thomas on Apr 12th, 2013 at 6:42pm

    Gas Valve Clicking
    The igniter heats up and sometimes the gas valve clicks multiple times before staying on continuously. Have changed the igniter and it is still doing this. No trouble codes from the control panel. When the burner stays on, everything works as expected.
  • Posted by saxaftermidnight2 on Apr 4th, 2013 at 2:11pm

    4 flashes red lock out due to failed ignition
    What to do to get ignition?
  • Posted by Kayla Morrissey on Mar 11th, 2013 at 4:07pm

    Limit switch open
    My furnace is blowing cold air and my service light indicator says my limit switch is open it cold as all get out in my house suggestions would be great!
  • Posted by betheath on Mar 3rd, 2013 at 4:30pm

    I am trying to figure out where the air filter is
    I am trying to figure out where the air filter is on my M1MB Nordyne gas furnace.
  • Posted by trstarz on Feb 17th, 2013 at 12:55pm

    Can you remove and clean and re-install a Cobustio
    Can you remove and clean and re-install a Cobustion Blower Assembly on a Nordyne M1MB 07 A BW Furnace?
  • Posted by scampbell1500 on Jan 26th, 2013 at 8:03pm

    blower fan
    furnace will ignite, sometimes fan will come on and work several dats, sometimes it won't. Flashes code limit switch when fan will not kick on. What is wrong?
  • Posted by blasekearney69 on Dec 19th, 2012 at 3:39pm

    need a telephone number for a question about the i
    need a telephone number for a question about the igniter location on the m1mb 070a bw
  • Posted by blasekearney69 on Dec 19th, 2012 at 3:21pm

    i have the m1mb 070a bw and need to find the ignit
    i have the m1mb 070a bw and need to find the igniter on the furnace
  • Posted by mcarr63 on Dec 15th, 2012 at 8:41am

    The blower hesitates when the furnance is going t
    The blower hesitates when the furnance is going through a cycle.
  • Posted by gonzo181967 on Dec 11th, 2012 at 2:45pm

    I have a nordyne Model: M1MB0506ABW S/N: M1M98070
    I have a nordyne Model: M1MB0506ABW S/N: M1M9807022



    The burner ignites and there is just a clicking sound instead of blowing warm air. Is there any reset buttons? Help
  • Posted by Alan Annes on Sep 28th, 2012 at 9:23pm

    flame shuts off
    flame shuts off
  • Posted by jimb323 on Sep 26th, 2012 at 2:16pm

    Where is the furnace filter on this furnace? Our f
    Where is the furnace filter on this furnace? Our furnace is located in a closet area. There is a "filter" on the back side of furnace cover, but it is so open that I don't think it filters much at all. I don't see any opening in the system to install a replaceable furnace filter. Does it have one …
  • Posted by timpylka on Sep 14th, 2012 at 9:08am

    my furnace is flashing 2 times saying pressure swi
    my furnace is flashing 2 times saying pressure switch is open, how do I fix this?
  • Posted by little_trucker on Apr 11th, 2012 at 10:57pm

    Where are the filters located in an M1 series furn
    Where are the filters located in an M1 series furnace
  • Posted by mrq3883 on Jan 14th, 2012 at 5:59pm

    I have a Nordyne Intertherm model # M1MB070A BW, s
    I have a Nordyne Intertherm model # M1MB070A BW, serial # M1M000500035. The control module is indicating that the limit switch is open. Every time it goes through a cycle, it shuts down soon after the flame comes on. Can I fix this?
  • Posted by debora_a_roscoe on Jan 9th, 2012 at 1:29pm

    I need instructions on how to convert my propane f
    I need instructions on how to convert my propane furnace to natural gas. NORDYNE Model:MIMB070BW SER#MID0304178 AUTOHEAT.
  • Posted by bobnmeltodd on Nov 19th, 2011 at 4:59pm

    does combustion fan blow into combustion chamber o
    does combustion fan blow into combustion chamber or suck it out?
  • Posted by lksogm58 on Nov 1st, 2011 at 4:56pm

    Air is not moving correctly thru some of the vents
    Air is not moving correctly thru some of the vents. WHY?
  • Posted by susiemarie67 on Oct 26th, 2011 at 7:41pm

    where is the limit switch on the M1MB 077A BW Nord
    where is the limit switch on the M1MB 077A BW Nordyne furnace
  • Posted by bannerts on Oct 3rd, 2011 at 10:14am

    Good Morning, I need someone who will install this
    Good Morning, I need someone who will install this furnace in to a mobile home. And if i can get a few differnet jus to do a price comparison would be great. Thank you, Sheila
  • Posted by bhenningr on Oct 2nd, 2011 at 4:15pm

    Our 6 yr old Miller Furnance M1MB 077ABW will not
    Our 6 yr old Miller Furnance M1MB 077ABW will not lite the natural gas burner. It has a Robertshaw pilot valve. The control Module light is a steady red. I have witnessed the ignighter attempt to light the burner but fails. Any thoughts?
  • Posted by rgbroy on Sep 12th, 2011 at 12:01pm

    need inducer fan for Miller M1M 070A AW forced air
    need inducer fan for Miller M1M 070A AW forced air gas furnace
  • Posted by chwy_h on Aug 10th, 2011 at 2:26pm

    how to wire a power to a Nordyne M1M Gas heater?
    how to wire a power to a Nordyne M1M Gas heater?
  • Posted by bay021 on Jul 5th, 2011 at 11:10pm

    the indicator light flashes three times no my mode
    the indicator light flashes three times no my model #m1mb-056a-bw, i looked it up in the book and it tells me that the pressure switch is stuck closed .how can i solve this problem. thanks Alonzo Echols (773)640-0960...
  • Posted by milli on Dec 26th, 2010 at 2:35pm

    ignitor
    will not light
  • Posted by dmandds07 on Oct 3rd, 2010 at 9:08am

    pressure switch is stuck on
    led light flashes twice,manual says pressure switch is on,and furnace won't turn on
  • Posted by deanandsue on Sep 28th, 2010 at 2:01pm

    my M1MB056ABW furnace
    Not really a problem. I would like to have a

    complete parts list for my furnace. I am a retired hvac technician, and in the future I plan on purchasing some possible replacement parts for my furnace. Lets face it,even quality equipment breaks down

    sooner or later. The serial number of my furnace …
  • Posted by on Feb 3rd, 2010 at 3:08pm

    how to fix...
    ..."pressure switch is open"
  • Posted by ydebbie12 on Nov 5th, 2009 at 6:32pm

    m1m furnace
    yellow an red light on/furnace will not light
  • Posted by kycejo on Nov 1st, 2009 at 5:48pm

    Air vent
    Where is the air vent on the M1M series?
  • Posted by kycejo on Nov 1st, 2009 at 5:46pm

    Pressure switch
    pressure switch is open. Furnace won't click on.
  • Posted by thomas1449 on Sep 29th, 2009 at 3:55am

    piolet light wont ignite
    I follow all procedures,nothing?two flashes from the furnace-indicate openpressure switch?Please help.send feed back to:Tommyrayray@yahoo.com.Thank you
  • Posted by lawrence.dlyma on Aug 9th, 2009 at 9:50am

    gas valve
    model#MMHB-070ABHR-06

    serial#MMH970908724



    please find the gas valve for this furnace or the manuals
  • Posted by scha5151 on Nov 15th, 2008 at 4:28pm

    operators manual
    would like to make sure which operators manual is right for our furnace the mod # is M1MB 056ABW it is oil

Ask OwnerIQ Members for Help With A Problem

Let the ManualsOnline Membership help you! Tell us about the problem you're having with this product. Your request will be posted for the ManualsOnline membership to view. You will be notified of responses by email. Required fields are in BOLD.

Product Picture:
(optional)

Supported file types: .jpg, .gif, .png
 
  


Menu

Recent User Activity

  • Nordyne Furnace iSEER FG7T
    Yellow LED flame indicator light does not come on
    Yellow LED flame indicator light does not come on Fan does not come on

TRUSTe Seal


  • Facebook
  • Twitter
  • ManualsOnline Blog
  • ManualsOnline Google Plus