Help Requests

Hunter Fan Thermostat 44110

Get This Manual


Can You Help With These Problems?

  • Posted by medtech77 on Apr 12th, 2014 at 9:15pm

    What does it mean when black block flashes with th
    What does it mean when black block flashes with the word cool
  • Posted by dmlawnservicellc on Mar 17th, 2014 at 7:13pm

    Won't stop beeping
    Won't stop beeping
  • Posted by ladytooltime on Mar 7th, 2014 at 11:11am

    what does code 4 mean?
    what does code 4 mean?
  • Posted by oldfolks on Mar 5th, 2014 at 11:53pm

    what does code 4 mean? and the letter RECO
    what does code 4 mean? and the letter RECO
  • Posted by diannahenry on Feb 10th, 2014 at 6:59pm

    Do I need to reset after changing batteries? I h
    Do I need to reset after changing batteries?

    I had a strange hot electrical smell coming from the furnace for 2 hours, not smoke....then when the smell was stopping , I turned up the heat 5 degrees and NO fan or heat....
  • Posted by rdowd4d on Feb 9th, 2014 at 10:54am

    hello I have the hunters thermostat model 44100 ca
    hello I have the hunters thermostat model 44100 can you tell me how a can get it to read f it's on c ? I push the reset that did not do it.
  • Posted by kerns69 on Jan 26th, 2014 at 6:48pm

    What does code 4 mean
    What does code 4 mean
  • Posted by raymond.bradley2 on Jan 25th, 2014 at 9:34am

    need manual for 44100A and 44250A Unable to get p
    need manual for 44100A and 44250A

    Unable to get program to raise temp from 60 to 68
  • Posted by mostellagilbert on Jan 16th, 2014 at 2:22am

    thermostat blinking # 4
    what does the blinking # 4 mean
  • Posted by danmattay11 on Jan 7th, 2014 at 10:24am

    its struggling to get above 66 , blowing cool air
    its struggling to get above 66 , blowing cool air constant?
  • Posted by Kris Wagner on Jan 3rd, 2014 at 3:09am

    woke up this morning to a very cold house. Put n
    woke up this morning to a very cold house. Put new batteries in and that seemed to solve the problem. so i went on to work and didnt worry about it. came home to a very cold house , heater off again. The #2 is flashing . What gives?
  • Posted by neil.2003 on Dec 29th, 2013 at 12:59pm

    We want to put hunter programable thermostat to ma
    We want to put hunter programable thermostat to manual, how do we do this? it is an older model.
  • Posted by retiredandlovingit68 on Dec 20th, 2013 at 3:51pm

    What does RE COD means
    What does RE COD means
  • Posted by wasatch801 on Dec 16th, 2013 at 11:25pm

    Battery Issues
    S.O.S.



    I have a Hunter model #44110 thermostat control that is suddenly not maintaining battery life? I put new AA batteries in it then after just a few hours the low battery indicator blinks then eventually the thermostat control goes completely dead?



    Is the thermostat control defective and need…
  • Posted by johnam23 on Dec 14th, 2013 at 6:10am

    I have no heat the thermostat flashing #4 what doe
    I have no heat the thermostat flashing #4 what does that means
  • Posted by colney on Dec 11th, 2013 at 5:32pm

    My model 44110 low battery indicator keeps flashin
    My model 44110 low battery indicator keeps flashing even after new batteries installed. What should I do?
  • Posted by shesmynoni on Dec 7th, 2013 at 3:49am

    My pilot is lit but the thermostat won't turn on
    My pilot is lit but the thermostat won't turn on
  • Posted by hjhuston on Dec 5th, 2013 at 1:25pm

    how do I change the temp setting? Heater comes on
    how do I change the temp setting? Heater comes on at 60 degrees, goes off when it reaches 62. I would like it a bit warmer.
  • Posted by michabldwin on Dec 5th, 2013 at 12:53pm

    how do I set thermostat
    how do I set thermostat
  • Posted by ruthjones12 on Nov 24th, 2013 at 2:02pm

    I need instructions for Model # 44110 I keep prog
    I need instructions for Model # 44110 I keep programing it and it always goes back to 8:20 {Pm and now I cant get PM to even come up
  • Posted by tlm.debann on Nov 18th, 2013 at 9:50pm

    Can't get our furnace to work. The thermostat is a
    Can't get our furnace to work. The thermostat is a hunter 44110
  • Posted by julia.shope on Nov 15th, 2013 at 3:33pm

    I have been trying to reset the programming but it
    I have been trying to reset the programming but it will not clear what is already been entered. I am using a paperclip tip to insert into the reset button while pushing the ( i think it was the up arrow) . It then shows 1200a.m time but sometime during the night it drops to 60 and is freezing when w…
  • Posted by on Oct 23rd, 2013 at 11:04am

    it wont seem to go over 66 degrees. I did a reset
    it wont seem to go over 66 degrees. I did a reset and reprogramed my thermostat. any suggestions
  • Posted by beckykammer on Aug 28th, 2013 at 10:38am

    what does span mode do
    what does span mode do
  • Posted by heavensent on Aug 19th, 2013 at 8:39pm

    My hunter thermostat 44110 is saying Hi and then i
    My hunter thermostat 44110 is saying Hi and then it says it 99 degrees in the house but its not
  • Posted by Michael Thompson on Aug 15th, 2013 at 10:12pm

    cool is flashing on my hunter 41100 thermostat
    cool is flashing on my hunter 41100 thermostat
  • Posted by jaddoty84 on Jul 6th, 2013 at 10:12am

    We just had a Hunter Thermostat put in our apartme
    We just had a Hunter Thermostat put in our apartment and got no book for it and don't know the model number, when we set it for 78 degrees at night, by the next morning the temp set for is 85 degrees and we don't know how to keep it on what we set it fr.
  • Posted by d_r_1635 on Jun 30th, 2013 at 10:37am

    Can pre-programmed times/temps be permanently over
    Can pre-programmed times/temps be permanently overridden or deleted?
  • Posted by Marnie Hirschey on Mar 31st, 2013 at 10:15pm

    I have the same problem the bottoms won't work I'v
    I have the same problem the bottoms won't work I've reset it several times nothing???
  • Posted by Chandler Byers on Mar 25th, 2013 at 7:52pm

    my system had a power failure yesterday and my the
    my system had a power failure yesterday and my thermostate quit working. I bought new batteries and the system looks operational but my sylstem won't heat? I pushed the reset button but it still is not heating?
  • Posted by smkross on Mar 24th, 2013 at 2:53pm

    Why is there an exclamation mark flashing.
    Why is there an exclamation mark flashing.
  • Posted by kslechta on Mar 13th, 2013 at 11:09pm

    I can't get the manual. Just a picture of manual
    I can't get the manual. Just a picture of manual on screen. I need to find out how to reset RECO. I need manual to find out, no instructions stating this on thermostat.
  • Posted by karenwilson on Feb 9th, 2013 at 3:29pm

    The number 2 is flashing, and I have replaced the
    The number 2 is flashing, and I have replaced the batteries twice. the furnace comes on, then goes right back off
  • Posted by Austin Bain on Jan 21st, 2013 at 8:49pm

    non responsive buttons
    the buttons on my thermostat are unresponsive and i cant change anything and the heat wont come on it says heat even when its set to off and is flashing a 4 i reset the panal and the breaker and still nothing can some one please help
  • Posted by fgeo51 on Jan 2nd, 2013 at 9:39pm

    what do we do if it is flashing a 3 and the dang t
    what do we do if it is flashing a 3 and the dang thing is not turning on and right now we are freezing. ihave it set for 78 it is flashi ng a #3 and it is not turning on it is 62 what do we do
  • Posted by ddt1934 on Dec 30th, 2012 at 11:48am

    it flashes a number 3 on screen and the furnance s
    it flashes a number 3 on screen and the furnance seems to run longer and blows cold after a point. is there a filter in the thermostat?
  • Posted by shemberg on Dec 17th, 2012 at 12:21am

    What is the SPAN change mode 1=Fast, 2= Normal,
    What is the SPAN change mode 1=Fast, 2= Normal, 3= Slow ? Can you explain what is is ?
  • Posted by wehugu on Dec 12th, 2012 at 12:10pm

    Need to know how to open thermostat unit, to clean
    Need to know how to open thermostat unit, to clean the insides.
  • Posted by teri238 on Dec 11th, 2012 at 8:31am

    My heater never seems to reach the set tempature.
    My heater never seems to reach the set tempature. If it is set at 60,and the thermostat says it is 57 in the room it never seems to reach that 60deg mark, it runs constantly and never reaches the set tempature
  • Posted by shautay on Dec 9th, 2012 at 7:22am

    how to set the temperture it keep coming on, when
    how to set the temperture it keep coming on, when we are not home?
  • Posted by ralfal on Dec 1st, 2012 at 12:45pm

    I have the Hunter Model 44100 - not shown on your
    I have the Hunter Model 44100 - not shown on your product list. How do I program it? I moved into this house and no manual was provided. Can I use one of the other manuals? Thanks.
  • Posted by allgirls41 on Nov 29th, 2012 at 12:03am

    Hunter Mdl.44110 How do i get the heat to work
    Hunter Mdl.44110 How do i get the heat to work
  • Posted by addisqueen1 on Nov 28th, 2012 at 7:46am

    Heat is not coming up. What does the "W" mean when
    Heat is not coming up. What does the "W" mean when it comes on the screen Model 44110
  • Posted by toledo on Nov 24th, 2012 at 11:10am

    how do you get the heat to work?
    how do you get the heat to work?
  • Posted by percato01 on Oct 24th, 2012 at 12:27pm

    how do I increase heating temperature in 44110 the
    how do I increase heating temperature in 44110 thermostat?
  • Posted by marlene.montgomery on Oct 9th, 2012 at 4:16pm

    My heater is not coming on even though the desired
    My heater is not coming on even though the desired temperature is greater than the current temperature. Any ideas? The system makes a clicking noise like it is getting ready to come on but then does not come on. The fan works but the auto does not.
  • Posted by fifarefisaac on Oct 6th, 2012 at 4:17pm

    How do i increase the heat. Its cold and i cant g
    How do i increase the heat. Its cold and i cant get it turned up
  • Posted by glsnightout on Sep 17th, 2012 at 12:13pm

    how do i clean the filter for hunter thermostat #
    how do i clean the filter for hunter thermostat # 44110
  • Posted by wildeflame on Jul 17th, 2012 at 11:46am

    Filter 2 is flashing, whats that mean?
    I'm getting a flashing message of filter 2. and I dont know what that means, theres new filters in.
  • Posted by kayo410 on Jul 8th, 2012 at 3:30pm

    model # 44110. How can I lower the temperature? It
    model # 44110. How can I lower the temperature? It will not move from 82 degrees
  • Posted by shirlmr2 on Jul 7th, 2012 at 6:52pm

    termo will not cut off/ set for auto,, and the te
    termo will not cut off/ set for auto,, and the temp on the thermo keeps rising.



    44110 model
  • Posted by bethrbrand on Jun 29th, 2012 at 4:42pm

    What does Re Co mean on this thermostat?
    What does Re Co mean on this thermostat?
  • Posted by Joe Chue on Jun 28th, 2012 at 5:07am

    my condenser fan and compressor is running the lag
    my condenser fan and compressor is running the lager copper pipe also very cold if you touch it, but the my attic furnance blower isn't kick on!..

    can anyone help many thanks.
  • Posted by tamora1 on Jun 14th, 2012 at 10:05pm

    We can not get the cooling system to come on. It i
    We can not get the cooling system to come on. It is going to be in the 90s and humid tomorrow! Help!
  • Posted by rickeyharrell on May 2nd, 2012 at 5:33am

    the compressor runs but the inside blower didn't c
    the compressor runs but the inside blower didn't come on, so the Freon lines from the compressor iced over. Could the thermostat cause this problem?
  • Posted by klchevrier on Apr 27th, 2012 at 6:15pm

    i had the low battery message 2 and now its Ii hav
    i had the low battery message 2 and now its Ii have replaced the batteries 2 times. i have reset the system that didn't work. I turned all power off to the system for a few min and tried again - nothing works. Is their any way to solve this???
  • Posted by vthome on Feb 26th, 2012 at 7:06am

    What does RE CO flashing code mean?
    What does RE CO flashing code mean?
  • Posted by talsrccw6510 on Jan 25th, 2012 at 10:03am

    i have the 44110 thermostat and i want to hook it
    i have the 44110 thermostat and i want to hook it up to a peerless gas boiler thermostat box
  • Posted by kpuricelli1 on Jan 4th, 2012 at 3:54pm

    I set the thermostat for 70 degrees and it only la
    I set the thermostat for 70 degrees and it only lasts for a few hours how do I rest this thermostat to stay the same and its blinking 2
  • Posted by kurfess on Dec 17th, 2011 at 11:18am

    Manual
    I am trying to download the Manual for the hunter 44110 Thermostat and am finding it impossible to do so. Is there a simple pdf you could send (or link to same) so I can get the operation information I need? kurfess@comporium.net
  • Posted by jbuzz2014 on Dec 7th, 2011 at 5:18pm

    I have this thermostat and it is showing code re c
    I have this thermostat and it is showing code re co. What does this mean?
  • Posted by rickbinns on Nov 26th, 2011 at 5:17pm

    Only have two wires one red and one white. Where d
    Only have two wires one red and one white. Where do they hook up.
  • Posted by denisebanks4037 on Nov 16th, 2011 at 7:30pm

    need help in setting my thermostat to the right t
    need help in setting my thermostat to the right temp
  • Posted by roadster_boy on Nov 14th, 2011 at 2:35pm

    The temperature sensor appears to be inconsistent
    The temperature sensor appears to be inconsistent with the actual tempreature; is there a way to alter the room temperature sensor?
  • Posted by justabjk on Nov 5th, 2011 at 10:21am

    Can my Hunter #44110 programmable thermostat be ch
    Can my Hunter #44110 programmable thermostat be changed to a regular non-programmable thermostat? I do not have the patience to continue dealing with programing.....or do I need to purchase a totally new thermostat? Thank you for a response
  • Posted by sukiyoung on Oct 26th, 2011 at 9:08pm

    What is RE CO?
    What is RE CO?
  • Posted by rwdclang on Oct 13th, 2011 at 1:17pm

    Stuck at one setting. New Setttings will appear on
    Stuck at one setting. New Setttings will appear on screen but will not work. Ex Set at 62 after 11 pm, heat goes on at68 setting day time. use

    heat only.
  • Posted by jpguillory on Oct 9th, 2011 at 1:59pm

    light flashing 2
    light flashing 2
  • Posted by kmburkman on Aug 31st, 2011 at 5:07pm

    i need to be able to set the temperature different
    i need to be able to set the temperature differently, program for day and night. there is no manual in this house.
  • Posted by Mary Birkenmeier on Aug 25th, 2011 at 12:14am

    put new filter in held in filter button til it fla
    put new filter in held in filter button til it flashed now air not coming back on
  • Posted by aepdmp on Aug 20th, 2011 at 10:26am

    My old thermostat a Robertshaw 9610 has Y and W ju
    My old thermostat a Robertshaw 9610 has Y and W jumped together also a blue going to O and this does'nt match my Hunter 44110.Should i add a jumper to Y and H and leave out O and cap it off.
  • Posted by kgibson07 on Aug 19th, 2011 at 7:40pm

    How do you get to hold a temp for a vacation overr
    How do you get to hold a temp for a vacation override? I press hold for more than a second. Then press the up and down for desired temp. Then press hold again. Thermostat does not respond.

    Thanks.
  • Posted by mjsouth on Aug 6th, 2011 at 5:25pm

    i have the same issue and the manual does not addr
    i have the same issue and the manual does not address; flashing 2 on upstairs unit. What does this mean?
  • Posted by stephaniewalker21 on Jul 24th, 2011 at 11:10pm

    I have a flashing "2" on my upstairs thermostat an
    I have a flashing "2" on my upstairs thermostat and a flashing "3" on my downstairs one. What do those numbers mean?
  • Posted by chanelle909 on Jul 24th, 2011 at 6:54pm

    What does re co mean?
    What does re co mean?
  • Posted by chanelle909 on Jul 24th, 2011 at 6:53pm

    What does re co mean?
    What does re co mean?
  • Posted by storeys on Jul 24th, 2011 at 6:32am

    Could you please tell me what the flashing light m
    Could you please tell me what the flashing light means in the top right corner of the thermostat screen? It seems to be working ok, but we have misplaced our paper work and do not know what this means. Thank you. This is a digital thermostat for central air.
  • Posted by relippold on Jul 21st, 2011 at 10:40pm

    I have a Hunter 44110 thermostat in my house. I ne
    I have a Hunter 44110 thermostat in my house. I need to change it from celcius to fehrenhiet.
  • Posted by j.hammontree on Jul 6th, 2011 at 6:32am

    How can I get the Span number to stay changed? I h
    How can I get the Span number to stay changed? I have tried to change it several times I can change the number but when it goes back to the main screen it has not changed and the box is flashing. Do I need to enter it somehow I did not see that in the manual?
  • Posted by eddiekarriealex on Jun 16th, 2011 at 3:10pm

    what is the blinking 4 on the hunter fan thermosta
    what is the blinking 4 on the hunter fan thermostat 44110 telling me?
  • Posted by dididdy on Apr 8th, 2011 at 2:36pm

    Help with Thermostat 44110
    The thermostat is still "chirping" after we have replaced the batteries 3 times.
  • Posted by triplep52 on Dec 27th, 2010 at 10:09am

    44110 thermostat
    stays at 64 degrees and wont change need manual I have never had one.I bought double wide 3mos.ago.never set thermostat before
  • Posted by rebecca_boleratz on Sep 16th, 2010 at 9:49am

    Won't shut off when it's suppose to...
    If the house is 69 degrees and I set the thermostat for 70 - it will run until it's 72 going on 73 before it shuts off and then won't kick on until it hits 69 again... Same for HEAT and AIR...it's annoying because you're either hot or cold....thoughts???
  • Posted by edwinmrios on Aug 2nd, 2010 at 11:45pm

    problems setting it up
    I used to have an old thermostat and these are the cables, c,c,e,w2,y,r and g

    I follow the instruction about how to set it up the Hunter 4410 but there are some problems, when I turn the air conditioner heat start coming out.

    Any help please

    Thanks



    my email is edwinmrios@gmail.com
  • Posted by shultzr50 on Aug 2nd, 2010 at 1:14pm

    Therm Temp
    Can't change current air temp. permanently. I set it to 78 & press hold brings it back to 81 degrees.
  • Posted by sonialeigh78 on Jul 26th, 2010 at 10:08am

    Temperature Control
    I am having a problem overriding the programs in the thermostat. I have it set at 73 degrees and it is continuing to allow the temperature to go up to 78. How can you delete all programs and only manually adjust?
  • Posted by lbrinkmn on Jul 14th, 2010 at 12:23pm

    custom programms
    how do I delete one customized program from my thermostat
  • Posted by whutt on Jul 12th, 2010 at 6:53pm

    Hookup for hunter 4410 Thermostat
    Currently have MH Mercury thermostat hooked to oil furnace with central air. 5wire system. . Wiring is white, blue to furnace. Yellow to cooling, green to man fan, red to 24vac. Can't relate to new unit.
  • Posted by lynn60 on Jun 7th, 2010 at 8:16pm

    Wiring Hunter Thermostate
    I am replacing an old Honeywell thermostat that had two wires, one red and one white. How do I wire this to the new Hunter Model 44110?
  • Posted by chileycold on Mar 17th, 2010 at 3:14pm

    how to find & change filter
    filter light is flashing but don't know what to do about it
  • Posted by jeanandallie13 on Mar 1st, 2010 at 12:35pm

    filter flashing
    I am having issues manually turning on the heat. the word filter keeps flashing?
  • Posted by on Feb 5th, 2010 at 8:58am

    My thermostat won't...
    ...give out heat
  • Posted by on Feb 4th, 2010 at 11:49am

    programing a joke...
    ... make it simple for common folks
  • Posted by devers234 on Feb 2nd, 2010 at 6:19am

    What is the...
    ...black 1 - heat mean on my screen?
  • Posted by on Feb 2nd, 2010 at 4:50am

    setting the temperature...
    ...
  • Posted by on Feb 2nd, 2010 at 4:36am

    why my unit...
    ...won't give out heat
  • Posted by on Feb 1st, 2010 at 1:51pm

    Trying to find...
    ...out why the heat comes on at some time but not others
  • Posted by on Feb 1st, 2010 at 8:04am

    order of pins...
    ...for gas furnace
  • Posted by on Jan 31st, 2010 at 6:08pm

    how to change...
    ...a filter
  • Posted by on Jan 31st, 2010 at 12:11pm

    is this model...
    ...compatible to a lennox 67k4801

Ask OwnerIQ Members for Help With A Problem

Let the ManualsOnline Membership help you! Tell us about the problem you're having with this product. Your request will be posted for the ManualsOnline membership to view. You will be notified of responses by email. Required fields are in BOLD.

Product Picture:
(optional)

Supported file types: .jpg, .gif, .png
 
  



TRUSTe Seal


  • Facebook
  • Twitter
  • ManualsOnline Blog
  • ManualsOnline Google Plus